ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Toms_clio
- Messages
- 1,611
- Reaction score
- 54
Latest activity Postings About
-
-
Toms_clio replied to the thread Clio ITB TPS sensor help.That was the plan. Let’s see what happens. I’m sure I will find out when i start it. Thank you for your time on this, much appreciated. -
Toms_clio replied to the thread Clio ITB TPS sensor help.Video of it all working.. although it needs to be adjusted slightly to 0v at throttle closed and +5v at wide open.
-
Toms_clio replied to the thread Clio ITB TPS sensor help.Thanks for your input mate.. so the 4 pin TPS there is 2 signal wires ( 1 for Right hand fitting 1 for left hand) a +5v and a ground. So...
-
-
Toms_clio replied to the thread Clio ITB TPS sensor help.None of the wires in the original clio 182 throttle body plug go to ECU pins 43,71 or 87 like most have said this is what it needs to be...
-
-
Toms_clio replied to the thread Clio ITB TPS sensor help.
-
-
Toms_clio replied to the thread Clio ITB TPS sensor help.Hi mate, no it’s not a Ktec kit.. they are pure motorsport bodies with an ME221 plug and play ECU.
-
Evening all. I’ve fitted a itb kit to my 182. On the TPS for the Itbs there is only 4 pins but on the 182 looms plug there is 6...
-
-
Toms_clio replied to the thread ITB’s gains.Thanks all, decided to go with a pms 48mm itb kit with a me221 ecu :). Will update with results once it’s all done and mapped
-
-
I made 212bhp and 159lbft but from lower down with just 197 cams and injectors, 182 exhaust manifold and original spec RS2 inlet...
-
Obviously everyone will have a different view on what represents "good value" but, if you're that conscious of a type when it comes to...
-
About 10 or so years ago I had ktec DTH ITB’s /gen 90 fitted with a bottom end refresh and went from 169 bhp to 202 bhp 172ftlb of...
-
Stock engine with with 438 cams and DTH Ktec ITB’s made 197 bhp and 152lb/ft Then with the cams retimed to 421 position the torque was...
-
Toms_clio replied to the thread Poor running 182.Are they really. I know they can run pretty bad when cold but none of my other 4 have like this. I have a spare front sensor so will...
-
Evening all. I suspect I have a little issue with my Clio. Firstly in the morning it runs like an absolute nail, splutters and miss...
-
-
Loading…
-
Loading…
