They're different, unfortunately.
I believe the 250/280 meg calipers are the same.
Ferodo ds1.11 or pagid rs-29 will do the job for track use. Prices seem to be similar everywhere.
Cheers…those pagids are bloody pricey!
Every good pad is really expensive for mk3/mk4 rs, its mad.
Are you after ultimate track performance or just upgrade over stock? The stock brembo pads are terrible on our 250, ive been considering going for mintex m1144 as bit cheaper at £200ish.
Seem ok price wise.
My mate uses PBS prorace on his 197 and they seem incredible from the passenger seat?
Ds1.11 are mega. I had hardly no airflow to my brakes on the extra van at Anglesey, the brakes were so hot that the lacquer melted on the wheels, no fade at all consistent pedal feel and bite throughout.I've got PBS Prorace on my Clio and can't wait to get rid. Quite wooden on the road and on track they're good for about three laps and then just seem to go off, really weird feeling where the Ds1.11 just kept going.
I've got PBS Prorace on my Clio and can't wait to get rid. Quite wooden on the road and on track they're good for about three laps and then just seem to go off, really weird feeling where the Ds1.11 just kept going.
If it's for road and occasional track, try Performance Friction Z Rated pads.
They last ages, no noise, low dust and ideal for the ring.
I had them on my last M3 on standard calipers and they didn’t seem any better than OEM to me…dont think they can handle the weight
The RP range is decent mate as are the range above that (SS I think). The green/blue/orange whatever colours yes I agree ... although the blues I ran were ok on track but nothing special and poor compared to the RP1's I had in for Anglesey.Wouldnt touch pbs or ebc personally, cheap for a reason.
If you want unreal power stick to the ferodo or pagid. The ds1.11 bite from cold is awesome but wear the discs fast. The pagids have less bite from cold but mega when on it. Ive just fitted a set of brembo 250 calipers to an astra vxr with the pagids, pedal feel felt awesome.
I bought direct from them and the price was for an axle set.Hero!
Im going to sound a mong here but qty1 for £159, is that going to be 2 pad sets for the front axle, or do I need qty2 for £318?!