Search results

:rolleyes: it could be the problem, thanks now I have to take it apart for the 3 time, not that much fun:(

it is also crash sensor in the hood with button that can be out of connection. try to push the button.

It is possible to take the immobiliser system out of the ECU but I dont know who can do it. try to search on the web.

need help??

My gearbox got stuck in 3 gear and it was not possiple to go to others gears or free gear. I recently took it apart to change bearing so I took it apart again and the syncro in one gear was out. I repair it and put the box together and the box worked fine, but after few testruns it got stuck...

Nice one good luck with the rest;)

thanks for the details. So if I will buy used box today the choose will be low mile 172 or 182 box I wish I could afford your JB3 avanti gearbox box stan*

Is JB3 from clio172, I read somewhere that they are strongest of them all, is that true?

from k4m 1.6 :D. I thought it will last few months:eek: I think it was big mistake to turbo power my f7r. This gearboxes are junk. I hope JC5 are better, it is maked for 150 hp but the other 110 hp. There are so many turbo projects on the web. I have never wread about gearbox upgrate. what...

I just turbo powered my megane f7r engine. and after 5 testruns I decided to park the car and when I tryed the rev the shifter just stucked and can only be set to first gear. Is my gearbox fuk***d or does someone know this problem. I have extra internals at my work so that makes me happier...

ok I will look at that. what gearbox is in the 182?

what gearboxes do u use in turbo clio's. what is the gearbox limits? I have willy motor. what gearbox will handle most and will fit? is the JC5 best?

nice , what ems are u using?

awesome!!!!!

buy this http://cgi.ebay.co.uk/K-TEK-TURBO-KIT-FOR-CLIO-SPORT-CUP_W0QQitemZ150272716578QQcmdZViewItem?hash=item150272716578&_trksid=p3286.m14.l1318

Does Mk1 valver ecu use coil and distributor ore coilpack. If it is not the same it will not work. Perhaps I will just get a standalone ems and the upgrade the engine later with forged pistons, con rods and turbo. Then it will work well. I have turbine but I need ems, pistons and con rods...

sorry my english!!;) Maybe it will work to take the key and the control box from the Megane and put it in the laguna :dapprove:

You misunderstood this. This is f7r (147hp) engine that I took out of Renault Megane coupé. This is almost the same as Williams engine. Then I put the engine in my Renault Laguna who had a k4m 1.6 engine. I used the engine, loom, box and ecu from the megane. thanks

Will it work for this engine? Where can I buy it? if it cost a lot I rather get a standalone ems system.

Is it possible to bypass immobilizer on Renault megane coupé Williams ecu. I was putting this engine in my Renault Laguna 99 and it won´t start. :(

will the engine start if I connect power, ground, cam sensor signal, crank sensor signal, fuel pump and starter to the ecu. I just want the engine started and then it will be easy to figure out the rest.

this is the pin for the immobilizer control module

I am putting a 2.0 williams engine into my ren laguna 1.6. the engine is in, but the problem is the wiring harness. I need the pinout for the plug that goes to the fuse box and the relays. this is the white plug that connects to the wiring loom. (ren laguna 1.6 pinout from the fuses and...

I am putting a 2L engine in my renault laguna 1.6. I want to try the 1.6 gearbox on the 2L engine first and then change it later. (save money) . If it is not working well I will just buy the 2L gearbox. It's ok to try :D Thanks for the info:)

does the laguna 1.6 16v gearbox fit to laguna 2.0 16v engine?( K4M to F4R )

thanks:D

or can I use AEM Fuel / Ignition Controller same as this: http://www.aempower.com/ViewCategory.aspx?CategoryID=116

ok I have Renault laguna 1.6 1999 I am fitting a Renault F4R 2L 16v engine to the car A will rebuild the engine with new 8.5:1 COMPRESSION FORGED PISTONS I made a custom turbo manifold and I will use a turbo fram a Volvo XC70. my problem is the fuel, map , ECU what is the best choice...