Search results

We have fittings we can crimp on to braided hose https://www.brtmotorsport.co.uk/collections/braided-brake-hose-brake-fittings/products/m12x1-male-swivel-nut

Smaller port M10x1 Larger port M12x1

Hi veomuk, ebay or breakers is your best bet

http://rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=254598651731&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111

we could do single lines doing away with small Flexi for £60 delivered https://www.facebook.com/brtmotorsportltd

We can make any length you require https://www.brtmotorsport.co.uk/products/braided-brake-hose-1

https://www.brtmotorsport.co.uk/collections/brake-fittings

https://www.brtmotorsport.co.uk/collections/brake-fittings/products/m7x1-bleed-nipple

i use team dynamics and they are ok, i have some random after market alloy and they dont fit

standard drive flange with m14 tapped holes, drive spline machined bigger to take 197 cv joints

yes as abouve, tap the hubs to take M14 studs,changed to m14 after shearing m12 studs,changed to m14 years ago and never had any issues need to make sure tap is straight

Could go up to M14

Yes ive got it going through a seald hole in the standard vent hole, to go through to top standard screen vents, and blocked off all other openings, i keep it running on stage if its wet or 1st thing on a cold morning and keeps clear, but if it gets missed up mid stage does take a bit of time to...

Not sure how good heated screens are these days but in the past not had them last long, in the rain if you keep T7 heater running when your competeing good enough to keep screen clear, not ran it to the vents, screen only

https://www.brtmotorsport.co.uk/collections/steering

Hi yes Yes using 15" wheels Be using a twin pot rear caliper

light weight rear hub and brake set up

got some more work done big valve head fitted, next to sort out some cams

298mm rear hopefully get 300mm front go for pure front adjustable wishbones

Hi Yes sort of Not using standard rear brakes Using alloy hub brake rotor and bell

Latest work done

Be using 15in wheels, not had a chance lately to get on it, heres latest update

i think bronze looks fine

not quite finished yet, center consol still to go in

Box will be sadev ST-75

suspension will be 3 way reigers with pure motorsport wishbone kit engine is simlar to 197 R3 maxi, 84mm short stroke

engine build

axle mod

MK2 Clio rally build underway