Search results

damn I wanna know!

cool will be doing that in the morning ;)

How is the fuel rail guard taken off then?

Thinking about upgrading my xbox 360 to the elite but was just wondering what audio out puts are there? Idealy I would like to run hdmi for picture to telly and coax or optical to amp for sound. Is this possible?

I am going to attempt to fit some guages over the winter but was wondering what I should get and how easy they r to fit? Firstly I am thinking Oil Temp and Pressure. What other ones would people recommend and how do you fit them?

172Ph1 At the moment 960kg's with quarter of a tank and no one in it. Weighed on a public weigh bridge so how accurate I am not sure. Cars rear is striped out, no rear seats or seat belts, no rear panels, no rear wiper, no spare. In the Front I have Sparco Sprint V Seats, Alloy Mounts, Sebelt...

Will have a look in engine bay, not sure what all the bits are you said but I can use my common-sense with a lot of it. Need to get battery in boot to give me more space too. Got a Ali Bonnet ;) Air-con I don't really know what I am doing with that so don't really want to cut off wrong pipes and...

I have managed to get my 172 down to 960kgs (With no one in it and quarter tank of fuel) but I want more! My goal is 900kg but where can I get the last 60kgs from?? Here is what I have done so far; Rear totally stripped, no seats, no belts, no rear wiper etc all gone Front I have fitted 2...

so foxy it is the coolant temp yeh? Isn't that what's on the dash?

yeh but u coming up to a 3 gear corner, u doing 6500revs with 50-100 yards to go, you don't shift up and then shift back down again for the corner. Balance everything goes. Being able to hold them revs that lil longer does make a difference!

it has helped me out on different tracks, certain places I needed to change up 50 yards before corner, now I can hold power all the way too the bend. Also when I went to a rolling road day people were getting max bhp at like 6800-7000 revs so I guess it still pulls that high up!

damn was out for a hour but only tried a few times! Will do next time, thanks

should be, had been driving it over 10 mins (5miles), wouldn't take her to the limiter unless she was hot!

Had Car Re-Mapped (RS Tuner) and was brilliant. Car been sat on drive last couple of weeks, been fiddling with engine bay (battery disconnected). It idles around 950 still but revs out at 6800 again not 7500. Has me disconnecting the battery some how changed the rev limit? If so what do I do to...

I have made some new doorcards up from some sheet plastic which are about 5mm thick. Velcro'ed to the doors but when I replace the handles they stick out a bloody mile! What have other people done to make them flush? Also are the handles made from aluminum shallower?

With Brentacre?

I have just changed my insurance company to Brentacre and so far I cant fault them. Very Competative price and extremely helpfull (Scanned Cover Note so I could get tax that day ;) ) Anyway I have all the paper work through now and I was wondering do I write down I have a decat? I am guessing...

Looks like I may need to get Gearbox re built. Can I have it built to improve performace? Not looking to spend any extra than a re build. What can be done? Could I get 0-60 down to 5.5secs? Lower 0-100 time to?

Looks like I may need to get Gearbox re built. Can I have it built to improve performace? Not looking to spend any extra than a re build. What can be done? Could I get 0-60 down to 5.5secs? Lower 0-100 time to?

Think my sump is leaking a little bit and have seen one on eBay. Was wondering what sort of money a new one was? Also hard to fit?

Did u see him on track? Went like a rocket but was very soft I thought, bouncing a lot! Very friendly owner too!

Think this is a prodrive car, based on a Subaru Impreza. Went out on track, was quick for a lap then looked like it blew its engine, typical Subaru! The 2 Cars that stood out for me was the Matt Black Lambo and the 6.3CLK AMG Black Series! Awesome looking and performing cars!

Seek profesional advise I would. I have just fitted some seats in but had mounts that fitted car holes just! If u can get sub frames that fit I would do this, other than that take it to a pro and get them to weld in a proper frame (depends if u planing on returning car to stock how far u go) M8...

I have a 172, Ph1. Ktec Decat, CBA Induction Kit. Engine Code is CB1C. What different maps are there and which would be best for mine? A friend of mine is unlocking his RS Tuner for me.

I am fitting some after market seat during the weekend and was wondering what code the self retaining bolts are on the seats? Where they bolt into floor?

I had these on ebay last week and they sold but the buy was a time waster so on again, once again going cheap and ending tonight! £100 at the moment! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150368360713&ssPageName=STRK:MESELX:IT

what model ferodo? How much?

I am after a cheap set of pads to bide the time before I recondition my front brakes over the winter. I have New Brembo HC discs and will be using the car on track for 15mins Max at a time. Will standard pads be up to job or will they fade?

172 me thinks, was going fast. Silver or Titanium?