Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Haha yeah :( so thats no good :P. May get on it tomorrow and try swapping the lambda sensors! if not have a wack with taking the inlet and airbox off and give it a good clean! May be a moisture issue? :)
Haha thats good to know cheers Rob :P ! .. i think its okay too be honist doesn't appear to rattle! :) Just stuck in a rut now as to what to do next :P ! :(
Hey Mick i have checked the ECU and the black box is not on there and there is no wiring damage to the loom, also it will missfire when i rev on a standstill and it is not limited it will let me rev too 5.5k ish, so you rekon i should check the throttle bodies? Thanks guys!
Hey Mick i have checked the ECU and the black box is not on there and there is no wiring damage to the loom, also it will missfire when i rev on a standstill and it is not limited it will let me rev too 5.5k ish, so you rekon i should check the throttle bodies? Thanks guys!
1.2 16v D4F
This is driving me up the wall! Wouldnt start one morning so changed the coil, started fine but then went to drive it up the road for a blip and begins spluttering, sounded like it was firing on 2. Waited half hour started it again and got about 5-10miles down the road then goes...
Iv got a stealth on mine and id doesnt sit that low..you can still see it but not that much. If you loosen the U clamp which connects the backbox and then twist the backbox and tighten it, it will sit higher :)
Go to admiral :) just got off the phone to them, im 18 with a dynamique, and with wheels and suspension for £1314.12 very good compared to what i have been quoted :).
No there not the same, my mate bought a ph2 clio and needed a new door so got a ph1 and went to change the stripes around and they wouldnt fit as the holes in the door are in different places..
Hi, just stripped out my clio well taken out the rear seats and want to falso floor it. Got all the stuff to do just wondering what people have used to stop the false floor from rattling if it does, thought about rubber matting but thought i would ask here before spending the money on buying...
Hi everyone, fitted a set of the rokkor coilovers about a month ago now and i straight away noticed i had alot of positive camber so thought ok ill sort it on the adjustment you have on the actual coilover but couldnt get the top of the hub any further in :( When i got the funds i invested in a...
Little Updatee...
Like I said in previous posts I had some coilovers to put on and im happy to say that their on :D
Dont look to bad I thought but since these pics were taken the car has been slightly raised as i couldnt get on the drive as it was :dapprove:
Also the 3/4 size plate...
Yeahh iv got blue badges on mine and iv been going there quite alot recently..ermm i cant remember seeing you haha were you in the carpark or driving towards the ponds?? And yeahh it is a non rs...