Search results

If the speedo doesn't rise with the revs it may not be the circlip! Maybe your driveshaft failed

When dreamland opens...... It's been opening for the last 5 years and one of the rides blew over the other day!!! Summer is ages away!

Birchington Kent, does Kent ever pull of any meets?

I sent my one to agency transmissions to get done alone with a refurb! It's just one thing less to worry about

Honestly I have had it pop out on me before and replaced with new clip from Renault it doesn't last, they are like Pringles. I got my one bolted in the end I got tired of replacing it! And it's been fine ever since

You can't be considering selling already? I don't think il sell my one anytime soon!

Just to add myn is 249 and that is plenty can't really see much more being needed for road/occasional track use.

It depends on your budget if you have loads if money that you can throw into it without the missis moaning build your own if your on a budget get a second hand one for half the price of a build

Also I'd buy one already done I'm at about 12k now and still need 4pots LSD and a cage and plenty more if I wanted Infact it never ends

Chi you have already bought most of the already built cars in the uk leave some for the rest of us

The car seemed to be running hotter than normal so I flushed the whole system cleaned the bottle and filled with green alien blood (type d renault coolant) Fixed!!

Cold air, I notice on a cold morning the car runs really nice.

Just like to bring this up again, has anyone got rid of the aig bag, serv light on a phase 1 Clio 172 I spent a couple of hours today with no joy all the restistors have a solid connection. does anyone know if I could send the aig bag ecu to someone with clip to sort it that way?

I have bought a gen90 with the licenced software and cable, the car ticks over really bad and have been told I have to adjust the throttle postion sensor. But I work a lot and won't have the chance to be with my car in work hours to ring ktec to do it! Has anyone else had to do this was it simple?

Put a false floor in the back then washed and waxed

I recently had my box done by agency transmission i think it came to £300 ish the box feels so much better. Id 100% recommend. And a very quick turn around too!

Was he using a gen90?

After about a month and nearly £2000 the car has fired up and is nearly back on track. after replacing lots of engine senors, a de cat, lambda sensor, throttle body i decided to buy a new ecu and use my old uncut original engine loom and hey presto it started. i think i found the problem while...

The inlet holes are slightly bigger and and better fit, a lot of people say there are good gains to be had.

I have many more but it won't let me upload! :-(

But does it flash up with the ignition for the mot

No airbag has triggered I also had a spare airbag ecu from my old Clio that I know was fine. i won't be going back to that garage anyway!

I've seen threads on here with phase 2 models getting rid of the airbag light with resisters is this same technique possible with the phase 1 model. i did take my car to a "specialist" with the clip tool to have to switched off properly but a good few quid and an hour later I was told it was not...

There is a guide on changing brakes on page 7 of the guides http://www.cliosport.net/forum/showthread.php?408371-Fitting-Front-Rear-Discs-Pads-braided-lines-and-handbrake-adjustment-on-182

I changed my abs ring it was straight forward tap off then tap the new one back on, I heated the new abs ring up before fitting, but I'm not sure if that helped. just keep it square and work it back on.

It won't let me upload my other pictures at the moment but this is how it's looking after the spray, it's still not running right so I've ordered a new thermostat and coolant temp sensor to see if that fixes it as the new plugs where fine for a short test drive, but the car was running too...

I have this same problem. I've checked my earths they are fine. There really isn't much info on this light other than it's not a gear shift light! If you find out I'd be grateful to know what it was.

Did this get sorted I'm having the same issue at the moment. And I'm a bit lost :-(

The car is all fixed and running fine again, decat fitted along with megane f4rt spark plugs. i just hope it stays that way!

After that transformation it's a shame! I recently restored my phase 1 and im still loving it. If your selling your wheel spacers il be interested.