Search results

Finally got around to fitting my phase 1 throttle peddle and managed to feed the cable through nicely and connected to the bodies, sanded down cleaned and primed my lights ready for paint as I've sold my fibreglass blanks. Not sure on the colour yet still deciding how I want it to look. Got the...

Another nice suprise in the post today

Nice suprise with the courier today

What I've found is some brackets from b&q which are the correct length and holes though to small in the correct place fitted 2 either side and works spot on with some extended bolts

Roughly fitted the itb's so i can cut the front panel for the trumpets to fit nicely behind, will get that finished then install them fully tidying up the cables ect. Ordered my ecu from ktec with software package so will be able to get this mapped to my requirements. Only thing slowing me down...

So it hasn't got 240 bhp, it hasn't got turbo, doesn't have forged internals and hasnt had the cambelt done, is it really a clio or is it a corsa???

Well the jms has gone along with a few other bits but a few additions are Only roughly on to measure how much of the front panel needs cutting away. Also Sold the ktec exhaust and bought a very light oreca look forward to.hearing how it sounds! Will be ordering a gen90 tomorrow with software...

That's made my night thanks for finding that beaut of a advert!

Hi can anyone recommend a good super sold slick tyre and where to buy them

In not worried as such but more the fact that when im running 15mm spacers at the rear the one sits perfect the other looks horrendous doesnt look right at all

There is approx an inch difference at the top of the wheel looks like there is camber on the one side but not the other.

Was putting some spacers on the rear yesterday and the drivers side sticker out alot more than the passenger side it's like the rear end is aligned wrong or something, anyone have any ideas?

Yes that looks like what I have there, it's finding what's missing from the kit, so far it's been straight forward but havnt done the throttle peddle yet

Right well the first thing is where do I plug the existing map sensor into? And where can i get a tps adaptor as it didn't come with one

Right well the first thing is where do I plug the existing map sensor into? And where can i get a tps adaptor as it didn't come with one

Hi guys Where can i get a tps adaptor so i can plug my ktr itb into my throttle body cable there is some kind of adaptor I didn't get

Does anyone know of a fitting guide for the ktec itb apart from the videos?

The car is just running a rev counter,engine temp, and warning lights.

It is just a 172 cup currently running reduced standard loom as I had everything not needed removed this year

2002 clio cup

Right looking at my options now Would an omex 200 run them or will I need to go to the 600? What else apart from the gen 90 is there

Obviously the standards are to short what length do I need for 15mm spacers

Want some bits sprayed on my car so looking for a decent sprayer or wrapper if anyone knows anyone

Yeah it stops turning over but I think that's because there is no fuel, as for lights I have just a rev counter with the res warning light and battery light

Went to start my track car today and it wouldn't go, would turn over approx 5 cranks but not start, realised the fuel pump was not priming so fiddled about and eventually it started. Is this an immobiliser issue or fuel pump on the way out or just maybe a dodgy bit or wiring!?

Right when I bought my clio it had been bodged a little, the obd port had been taken out. I've bought a obd port to wire in but what I'm wondering is can you access the ecu through one of the ports on the black box inside the car? Or will I need to wire the port back in?

Havnt updated for some time.... Well the car is going well, seem to be getting it set up perfect on the hill :) As for what's happened more to the car Taken the neggy camber spacers off the rear Dash is totally out and the loom tidied and excess wiring taken out single rev counter fitted...

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He Can I ask where you got your switch box from??