Search results

As title for circa 240 bhp n/a engine. i have both injectors, any experience on which is best? Megane are 491cc and pico 162s are 377cc approx so fine on flow but what about spray pattern.

Got a megane itb manifold from Jenvey for my rally engine so I can run a new induction set up but fitted it tonight and the mis match port to manifold is very poor. To make it work I would need to mod the ports in areas and the manifold in others. Even the casting hasn't fully clean up on the...

Do they do one for an F4R oil pump? Have one for my f7r engine and ups the hot oil pressure on this 1-2 bar when hot. Seen a few comp engines on here and they run 3 bar when hot which I think is too low.

Wondering what these weigh and wether to get a kevlar one. Anyone know?

About to fit poly rear quarter windows. The glass ones seem to have a seal around the outside, do you retain this with polycarbs ?

Anyone got a fuel tank diagram showing filler neck and all the vents? Renault Diologies my be?

I need some longer wheel stud but have mixed threads (Current ones are cup racer ones):- 15mm thread into the hub is M12x1.5 and the blank of 10mm and then 55mm of M12x1.25 = 80mm Im looking for some the same threads but 100mm O/A Any help ?

The port sizes are different on the F7R megane and the Clio but on the jenvey drawings it shows them the same size? What are the options for an ITB manifold for an F7R Megane head?

Whats the difference, is the F7R Williams inlet port more like the 172 ?

Would an Omex loom for a F4R work for a F7R, guessing all the sensors are the same connectors and in the same place (ish) ? Would any mods be needed ? Any feedback ?

Does anyone have a summary of the weight saving oppotunity for :- Bonnet - fiberglass Doors - Polycarb winder mech removal Tailgate - Fiberglass Glass - Replace with Polycarb Sure i have seen something but can not find it.!

First drive of the new car, all i can say is wow. Sequential box and fully Rj suspension is just razor sharp and soooooo much grip.! [}:)] Just needs the engine from the pink car and we should bit quite a bit quicker.!!! [:D] They were clean 2 mins previous!!! First shot of the car out...

Im wanting to improve the corner weight of the rallycar but need some height adjustment on the rear (one side only). What level of adjustment do you have will the torson bars ? is it min 20mm increaments of can you get say 5mm increments. The scales are telling me i need to adjust the right...

Interesting result on the rollers today in the Rallycar. Origional build mapping showed 228bhp 182lb/ft with 2" diam exhaust, Peak about 7k, went on 3 different occasion and was withing 1/2bhp.. Full 2.5" exhaust fitted and full top end rebuild (everything the same inc. timing) the map needed...

Can you get an wiring harness adaptor made and fit an programable ECU OMEX / DTA etc. will everything still work ? Saves fitting a full new loom.

Whats the best to use on a competition engine ? mine blown between 1-2 cylinders.......Looks like it had a std one fitted and lasted 2.5years of competition ??????

Can these be used on a MK1 Clio ?

PACENOTES Reporter at the event saved me the bother of doing a write up.... :p

Its a seperate electric / hydraulic unit, think mine is broke as it wont steer one way.........

First round of the ANCC championship - Jack Frost stages at Croft.Big issues on first stage as could not get 2nd gear and smackd some tyres as a result, then held un in the tight stuff a few times then on the last stage no 2nd gear and an injector plug blew out so limped to the finish. But we...

First round of the ANCC championship - Jack Frost stages at Croft. Big issues on first stage as could not get 2nd gear and smackd some tyres as a result, then held un in the tight stuff a few times then on the last stage no 2nd gear and an injector plug blew out so limped to the finish. But we...

Whats the difference ?? any pics?

One or both not sure if 172/182 ones are the same...

After confusion on which bearing and sourcing a new bearing and fitting into the hub, just a question. Theres circlip grooves on both sides of the bearing but im sure there was only one circlip on the inside and the other (wheel side) not fitted ? Plus its a magnetic one, guess its ABS related...

Dimension is 40x86x40 in the manual, is that a 182 Cup one ?

Is it a renault color ?

I hear if you change the sump on a 1*2 you can use a 197/200 6 speed box ? TRUE ?

Who ?

Anyone got any ?? Hubs / shafts etc

As promised latest Rally footage from the 2011 Promenade stages at New Brighton. After a great rally at Anglesey a few weeks earlier with 7 O/A and just piped to a class win by a Honda engine Elise (damn it was quick in a straight line!) we were all set to go for what is one of my favourite...