Search results

bump think i know what i need 2 now but what bulbs do i buy so i can replace them as soon as i get at them will my local halfords sell them?

lol do u recon that gt turbo owner likes to take roundabouts fast ;)

how much did u pay smokey?

rich is a tight git tho ;)

i lowerd the rear of my saxo 100mm i found out how dangerouse it was when i spun it over a junction at about 80mph lol got out ok just f**ked the zorsts and sideskirts mad! i only dabed the brakes 2! il do what ben says, i dont have acess to the pressure gauges, and the car is so low i...

i posted a while back about the rev counter bulb going on my valver lol i really need ti get it sorted now as i cant see a f**king thing! can any1 tell me how to get at the bulbs therE?> and what sort of bulb i will need?

hehe, well i used weights guide, after all the steps it then tells you to look at the valve i know i wont be able to adjust it enough to solve that sort of drop but iv got 310mm brembo 4pots up front, so i was hoping that will bring the balance back a little? if any 1 has used a longer...

iv lowerd the back of my clio quite a bit about 80mm and havent adjusted the rear brake bias valve, but havent been driving it, il be starting to dirve it soon, and want to ajust it properly, i know where abouts it is, but dont know what i need to do etc can any one help?

get a GOOD un and your hitting 60 before you know it iv got a mate, whose is really poor takes for ever, mine seems to fly there

iv got a vtr and a valver love the clio but tbh mate get a loan and get something else there a f**king hastle and waste of time unless you can find a real minter, but i doubt it, the have lots of comon problems and before you know it you will be shelling out a fortune on mechanical parts

why f**k around just get a valver lump they always come up for sale, will fit and are just short of 140bhp

i think you should rip it our and have a titanium exhaust made, so it looks all burnt and flamed up that will look top :)

I LIKE it without or with a really fine mesh you can get some fine mesh from motor world!

lol u could have ringer, cut n shut lol

yeh ben, iv seen the vid the belt, seems to move from side to side causing the knocking but only when cold maybee somethings loose or trying to come off? rich- its a wriote off mate, go and give it to the scrappy;)

clio handles w**k compared to the saxo why dont u just get a 106 gti to piss her

im down north quite far, im gonna take my brakets to an engineering company and tell them what i want etc if its gonna cost sh*t loads im gonna get rid of them

iv emailed ktec they said none of their brakets will fit the brembo due to the spacing on the caliper im wondering if i can some home adapt it using shims etc if u can tell me what they are!?!!?!

i had this problem mate you wont of damaged the thread on the tbar it wil be cheap bolts if u have acess to a slide hammer get one, weights guide is brill but my t bars were 2 seized for it i got hi tensile bolts and there threads f**ked up also, use loads of wd or plus gas like ben said...

ther 8400 looks spot on flips down 2 any news on the gearnob mate and the cover?> if not il just take the gearnob pm your adress and il send u the wedge

pioneer 8400mp is what iv got looks wicked aint used it yet but plenty of ppl rate it il let u know whats its like after the weekend mate

smokey u been getting my pms mate? i want to get the gear nob off u

will brakets from the 4pot kit they supply fit my brembos do yous think!? what do you mean by shimmed matE? IM Lost now might just get rid of the kit

yeh there good with some mods get so much faster and freed up

yeh iv got them mate i know its only a case of getting a set of brakets? i was on the phone to ktec the otherday and they dont yet do a kit for the valver im sure bb or some one will let me buy a set of brakets to fit the 16v as i dont know where i could get a set made! ben, how much...

yeh, you will notice the short gears and it will do your nut in get some simple mods like a bmc cda and a full magnex exhaust system and you can see 140bhp great fun:D

defos test drive the vts aswell you could get a much newer vts for a lot less and they got a face lift and interior change on 2000v plate the gti does have leather but a very dated dash, and was given white dials and few other updates on a simlar reg i terms of the performance i wouldnt...

just seenthat pic!

whats a group weight?

you tend to get this alot on very low cars! hehe