Search results

hello all, right here is my question due to the conversion i am going to be doing ( 1.5dci to 1.9pd tdi ) can i get the pd driveshafts modified to run clio 172 cv joints ? also any good companys i can send them off to , to do this? this is my plan all going well that the 6speed box to...

Hello all, anyone have a wiring diagram for a Clio mk2 ph2 1.5 DCI or know where to get one? need it for my upcoming 1.9tdi PD conversion. I have the wiring diagram for the pd engine loom and all other parts in the bay, ( as well as diagnostics wiring from the pd loom ) but i need the...

How common are they to leak air? Got the full lot on order form Renault Wolverhampton , but is it the seals that f**k up in then or just age? i know it's got to be air making my dci die or hunt on idle as the fuel likes look Like an expresso

Changed my battery on the dci today, washed it ( the outside not the engine ) and took it on a run, now the temp sensor won't go to half way (optimum temp) it just bobs around the digit under half. Whats the fault?

go on then whats wrong with this? ive only had the time to come back to this after trying to find out whats wrong about a month ago. http://www.youtube.com/watch?v=kM3diPLxLII

Anyone know a good set ? Have a 172 engine sat in the garage and the head has so many stripped/ cross threaded threads on it. Will also be usefull for when Im rebuilding stuff. As far as I'm aware most cheap kits don't last very long so I'm avoiding them. Price wise, I'm not complaining...

Hi all, a few of us are planning on meeting up this Sunday for a little meet, the location will be started at darleys hungry horse pub. 312 Boothferry Road, Hessle, East Yorkshire HU13 9AR. This will be also a photo opertunity ( subject to spinksy ;) ) There is a few places for good...

Got one of these today after my DCI desided it wanted to try cut out when upto temp and idle'n. I have got the new sensor and revised loom in the hope it fixes it as everything else is pritty much new. Question is , the cable is long enough to reach the ecu , so where do I chop and rejoin...

Came out this morning to go shops and the belt is squeaking it tits off AGAIN. That's three times this year I've put a new belt on. Its one of those auto tensioner jobbies ( as I have AC) so I'm guessing it's past it's time? Also have a metallic jingle that goes way if the aux isn't on?

so with winter only a month or two away, i desided to make an early start on the dCi. by all means not perfect but its still my mile muncher :) front bumper is hammered in chips, bonnet needs a dent taking out hence the silver strip. tow sticker WAS a joke for how unreliable it was :o i'll...

Got a slight issue with my new foam lance, when attached to the karcher HDS at work , it makes the machine pulse and thus causing the machine to auto trip to save it f**king up. Am i doing something wrong or is the lance possibly faulty? Raz

As above ? I'm half and half if I like it. Would help if I had a newer ' Clio' badge

My mate has just done a service on his pug 206 1.4hdi and he desised to change the fuel filter + filling it up first with fuel system cleaner. Started up alright. So must be okay to do that. The tw*t them desides to add more to the fuel tank on full like it recommended. Heres the fun part...

Hi all as above , the dci is having a little trouble starting, it will fire up after a few seconds but not instant like before. Also it's having a slight miss fire until it starts to warm up. no erratic idle just something I would like to fix before it developed into another issue. Ive done...

As above , just gone to fit my old camber bolts to a mates DCI van, they will not physically fit through the bolt hole. Which is funny as they fitted my old hubs before converting to 172 front geometry So what's the size? 14mm or 12mm Kamskill do both sizes

Hi all, just put a new locking ring on after noticing my old one was leaking, had to ring Adam and Fred to find out how it's done, took it for a drive and it's still leaking diesel. So my old man has stripped it down and tried again, he thinks it sealed but when I put pressure by hand on the...

Did a trip from Nuneaton to hull today, 130miles or so in total, 80mph no cruise control. How the hell has it done 130miles on a digit and a tinny bit? Nearly every other dCi I've driven doesn't even do that lol

Hi all, thought I would share my opinions on the ' blind test ' QD sealant. Smell- nice and pleasant Ease ( application ) piece of cake , a little spray goes a long way. Wipe off is just as easy. Duration- I've had it on my rear window for a week or so now and it's still keeping the dirt to a...

Got these from asda today £1.50 each and they do the job nicely 62cm-75cm size. Cheap and cheerful but it gets the job done, no damage don't to my paint either

Hi all need some advice on how to fix this ( pic bellow ) I know the fronts need camber bolts but the place I went to had lost the camber tool. Caster is also something I reall need to fix looking at the results. Front right sitting to far back. Main concern being the rear axle left side. All...

Hi all I can't figure out what numbers to use for bonxys radio code generator Help appreciated thanks

As above, really getting the itch to do this now, seems as the tuning ability of a 1.9tdi pd engine from a vw is very epic. race cams mahooosive VNT turbos racing injectors... List goes on. now I really want to be different and build a powerful diesel clio as apposed to all the petrol boost...

Keeping it clean I see mate :) guessing you was at the new (ish) gym

Taken rear speaker out so I can repair my rear quarter, driving home, no sound at all, plugged speaker back in, still no sound. Tried turning off and on including egnition. Guessing the standard head unit just couldn't take no more and shot its self? anyone know a fix ?

Nearly ready for CSS just need paint in a few places and its all done :) C+C welcome

As above, preferably close to Nuneaton :) does anyone know of one? Or is Fred good with setting up camber?

hi all, my new engine as been in for a while now, its got a new pump and injectors but the thing that's been playing on my mind for a while, is the injectors are rattle'n tapping loud under loud, plus it struggles to give power after 3k rpm injectors all coded, correct type and no air in the...

as above how the hell do I do this without getting it wrong and destroying the engine?. the crank face has no key way to get the flywheel allined. so guessing the tdc is like playing pass the parcel with grenades lol any help appreciated thanks R

having a wierd issue, the engine randomly becomes un responsive and looking at the dials , the revs bounce up and down aroind 1500rpm. it doesnt cut out but takes a while ( 10seconds or less ) to go back to normal revs. also the temp needle bobs up and down quick. guessing this can be a...

as above, I have no catt on my dci anymore ( ghetto de- internal ) now the big f**k off can is somewhat not efficient I presume just being a big space for gases to collect now I have a few lengths of exhaust piping , 2" and nearly 2.3" are these to small to put in place of the hollow can ...