Search results

Bought the ph1 172 a couple of months back. The previous owner kept telling me how it needed remapping to get to its full potential. The car spec - Cat Cams 420's - Open induction kit relocated to behind light - SS exhaust + Decat - Group_N ECU unlocked to work with car Apparently it is...

going to make a couple of cup racer tow eyes but need some dimensions first. Would a very kind person who has one please measure the above bits and the diameter of the bits + the size of the hole if possible. i will love you long time if you do :D ta carl

rubber flaps which are found behind the rear bumper. Can be heard 'flapping' in the track car. Do you actually need them or should i just remove them? ta carl

Just bought some Corbeau Forza seats with subframes. Problem is the seats are too narrow for the subframes? There is about an inch different each side :S The subframes are defiently designed for clios as they can bolt into the car but the seats seem to be too wide. Do Corbeau use different...

Few clips from me and my brother doing our first track day at croft yesterday. h_Lu60V1piY youtube has re-sized the video so looks abit squashed sorry thanks carl

First track day today. Was at croft with the RS owners club even though most of the cars on the track weren't Fords lol :clown:. Had a really good day with me and my brother sharing track sessions throughout the day. The car coped very well and lasted the whole day with no faults. The brakes...

ready for track day :D http://uk.youtube.com/watch?v=eWIXVbfac_Q *disclaimer: i dont drive like that normally but needed to test the tapped camera stand*

Track day alloys + tyres arrived back from painting Rover Stone Grey Yokohama Parada Spec 2 More Stripping some 1.2 badges .................all was going well until it fucked up again :mad: http://www.cliosport.net/forum/showthread.php?t=337545 thanks for looking Carl

While taking the ph1 out today after fitting new wheels it started grinding. Thought something was catching so checked behind the wheel but nothing. The noise gradually got louder but disappears when the clutch is deactivated. Sounds something like a driveshaft. any ideas? thanks carl

i dunno if its me being picky or what but on the way back from FCS i could hear a dry-ish noise comming from the engine bay at around 4000-5000 rpm. Wasnt very loud but sounded more raw than normal. any ideas? thanks carl

:D

ph1 172 track car, would like to remove the passenger side airbag from dash. How could i remove this without the dash light appearing? thanks carl

Silver Renault Diamond Black Diamond Anthracite thanks carl

Need abit of advice here. Got a ph1 172 track car and currently stuck on which tyre i should go for. Ive got two sets of alloys, one for road use and one for track use. The road use tyres just have some cheap road tyres on and i need to decide what tyres i should get on the track alloys...

was in a ph1 172 with hutchie (member from here) gave you the thumbs up and you flashed mains. :) /carl

after washing the ph1 today i noticed one of the relays behind the glovebox was clicking on and off quickly (kpet stopping and starting) while a few lights on the dash were lighting up. Would start fine etc so took it out as i thought it would be water getting to some electrics so i took it out...

following on from this thread: http://www.cliosport.net/forum/showthread.php?t=329699 The ph1 has been at a transmission specalists since yesterday assessing the damage and he has sent me some photos to explain what exactly has happened. Only had the car 2 days before it happened so it looks...

Track car, i like how it looks at the minute but quickly threw together a photoshop of some ideas im having. current: photoshop: what do you think? /carl

getting some corbeau seats for my ph1 track car. bought some frames off ebay (corbeau frames) and the seller says they wont fit? they were once fitted to a ph2 cup so i would expect them to fit a ph1 172? thanks carl

LOL its got side scoops and everything!* http://www.pistonheads.com/sales/544036.htm *sticker on the side of the car

Noticed a small leak from the ph1 today so cleaned it underneath, thought it was just excess oil from a recenty service. Took it out and before it was even warm the car suddenly lost power and wouldnt engage into any gear. So i pulled over and took it out of gear and put it in first realise the...

Looking at refitting the ph1 airbox instead of the induction kit which is currently fitted to the car. The battery has been moved to the boot of the car so there is alot of spare space in the engine bay. Is there any reason why the airbox is sat vertically apart from the space it takes up? Im...

from: to: :dapprove: /carl

Booked my car in for an AAS exhaust (custom) for june 17th and was speaking to the guy who works there. They always recommend using a 2.25 bore size on a clio 172 including 2.25 through the back box aswell. These guys really know there stuff and was telling me about a 200+ bhp clio rally car...

got this problem will using my RStuner: 'Electronic Throttle Control Limits Acquired' any idea of what it could be? lol thanks in advance Carl

recieved it today. my software version is: 6100 and the cal is 2A06. which ecu calibration do i need as i can only find maps for software version 6400 and 7XXX /carl

Have had my 172 2 weeks now and im still loving every minute of it :). In an attempt to get it looking good for FCS ive bought a couple of new things for it :) A 3/4 front plate (wrong font :S standard UK on order) and a polished battery cover. thanks Carl

Ive recently had a Toad Ai 606 alarm fitted to my car but they have fitted the siren in a really random and s**t position so im asking where are they located when renault fit them? as you can see it looks s**t and now i cant remove my battery :rasp: /carl

i work at halfords in Bishop Auckland part time on weekends and spoke to a guy today looking for paint for a 197 F1. was it you? :clown: /carl

At the north east meet, a few of us stopped back until around midnight just to get some good photos done by gary (wh173). I think its safe to say im glad i stayed :D was good crack and got some great photos (thanks gary) I was going to add these to the north east thread but didnt wanna bump the...