Search results

Thinking these could come in handy for small jobs :unsure: Mini ratchet spanners (full size for @dann2707 😂) https://www.ebay.co.uk/itm/133841122561?hash=item1f298d7501:g:xlkAAOSw0N9hDVdH

I'd just reapply every other wash tbh.

It'll last long enough between washes, unless you only wash it twice a year 😂

I know, not cheap. Coolant capacity is about 7L by the way, and you'll never get it all out so 5L usually does the trick.

https://m.autodoc.co.uk/febi-bilstein/1879930 Practically an oem part.

From a search of the number on that sensor A2C12839800, it's showing as being made by Continental.

Delphi will be just as good if not oem really. Possibly Febi Bilstein too if they do one.

You only go to watch @Louis try and park his car 😂

Always good service with their warranty.

Oh are they 😅

From factory it wouldn't have been keyed. Only the Megane ones were keyed, so it has probably been done by the previous owner. Safer having the keyway.

Either join up here and become a member and put a wanted post up or ask on the facebook pages.

Get a used one from a breaker. They can't be that expensive. Labour will cost the most as the subframe will need dropping to fit.

If it's leaking you know it's got oil 😂

Yeah I like the Bilt Hamber stuff as well.

This is the stuff i was thinking of, not as much as i thought https://www.frost.co.uk/por15-black-engine-enamel-paint-473ml/ Prep the block with this as it leaves a zinc phosphate coating https://www.frost.co.uk/por15-prep-metal-ready-946ml/

You can get enamel/epoxy based paint for doing the engine block, but it's expensive. Eastwood Aluma Blast gives a nice aluminium looking paint finish on all the silver parts. https://www.frost.co.uk/eastwood-aluma-blast-paint-340g/

Yeah 50Nm on an M8 is asking for trouble 😅

M8 of that spec would be around 25-30Nm usually.

Are the RP pads not full metallic then?

Wasn't aware they did these for Clio calipers now. Heard a few Mégane guys say they're good. Not much help mind, as I've no experience of them. I'm happy with my Winmax W5, there's enough bite in them to lock up in the dry.

California Car Scents are the only ones that seem to last. The Coronado Cherry were the ones back in the day.

Probably more like sticking caliper than the actual cable. You should be able to check to see if the arm of the handbrake behind the caliper is fully releasing.

Hmm yeah, sounds like you looked after them tbf. Could have been a tumble dry on high heat potentially.

Were you using drying aids with them? How often were you washing them?

That's something I haven't got actually, striking pry bars.

These are pretty much the only snap on thing I own 😅 Really good for removing awkward clips on cars though.

This is the 3/8 long reach in a packout case, for scale.

Open diff. Non of the RS Clios came with one, you'd think they would. Mark did mine in 2017 and it's been faultless after many track days at Oulton, it's my local too.

Worth considering a Quaife diff at the same time, Mark can supply them too. Make a world of difference on track.