Search results

As above no alarm.

Thats a 172? were talking about a 1.6 16v

Yeah, no idea on the standard spec there, but the Australian cars had 15" as standard

Will be if its an AUS car, they had 15s

seen this in Easterhoose unless there is 2 nonces

they absolutely do bolt straight on, just require some longer bolts and a couple of washers so it centres the caliper onto the disc

Totally normal on that engine its just condensation in the plastic rocker cover. Looks like that radiator has been leaking for a while and its been getting topped up with water, id want to change the radiator, waterpump, flush the system and fresh coolant (may as well stick a coolant bottle on...

As above I can't get mine to start most of the time with the key never mind without

Agreed, to the trained eye the Widetrack in the giveaway on my Van

Pictures like this make me really really excited. Love fitting loads of parts to my worthless car then updating my spreadsheet!!! Love that DCI's just go forever, my Mrs has a 2021 DCI just as they discontinued them in the UK, I don't know what I could ever replace it with :ROFLMAO:

Clio 197 buying advice... DONT Martin, 35, bitten by 2x Clio 197 and 1x Clio 200

yeah the crank pulley (as well as the cam pulleys) are not keyed so if the bolt is removed the timing can slip, if that's the case its not slipped enough to cause damage just requires locking and reset (assuming that is the case obviously)

First you would need to find out if the car is pre wired for cruise control, id take a guess at no due to cost saving since no model that late had cruise control, in the 2001-2005 cars you could option cruise control so it made sense to just have one wiring loom that could accommodate both. If...

did they remove the crank pulley to get the belt on as they didn't have a tool for the auto tensioner? I've seen a r****d attempt that before.

This, Rather not listen to music at all than listen to some amazon all in one

Was the crank pulley replaced?

Owned a 133 Never driven the other pair but i was running out of options since most have been picked!

crank sensor connected? faulty?

Incorrect, its 4 bolts on a RB, LY, PB - The others only have 1 bolt.

The donor car that I used to build my 182 van had a limp mode issue, the previous owner had thrown the parts cannon at it via a garage who were guessing. It had a new accelerator pedal and a new throttle body, I unplugged the white connector under the fuse box, cleaned up the connections and...

Yeah but if he's unplugged or damaged the connector to the solenoid while removing the inlet it won't be working. Check the vvt solenoid connector is ok. Make sure the map sensor on the inlet is ok. Does it idle ok? Not higher than normal? No miss fire?

I am SOOO angry at myself that I've never thought about that! I was wrestling with one on my 1.2 16v a couple of weeks ago

I've never changed the seals but the rocker cover is a piece of piss to get off even if you need to remove it.

if its wandering about and just feeling "loose" then its most likely the rear dampers are shot or the track rods/rod ends but id start with dampers!

I know rlink supports android auto but I'm not sure if it's interchangeable with medianav or if the wiring loom is different. Your 2015 will likely be medianav 1, medianav evolution didn't support rlink but there is a later model from 2019 I believe that looks like medianav evolution but...

Updated 44 & added 130 as per previous post Added 087 - Ebay 16k miles/1 owner No Reg Last Update Status Username (name) Notes 001 Y423 XEW 02/2010 OutDatedInfo P111ura Previously owned by [ScottyD] ~2010 - [Danndb] suggests may be written off 08/2012 - [Lee992] suggest plate and run since...

My mate has a kranzl and it's a cracking bit of kit, I love how quiet it is, I keep saying I'll get one when my K4 dies but so far it's about 9 years old and is still going like it's brand new, key is strong water pressure and empty it when done. I leave mine setup in the garage with a 15m hose...

were you doing it on a level surface? all 4 corners jacked up at the same height? if its not sitting right it will appear that the fluid is full but its just sucking air though, caught me out the first time I done a MK3, makes more sense when you see a side on view of the reservoir

Sounds like a complicated way of saying, we forgot to fit the earth strap :ROFLMAO: