Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I wouldn't say so, sounds about right, brim the tank (41 litres in the tank if that's correct) see how many miles it does until the light comes on, see how many litres it takes to fill again and now you know how many miles its done and to how many litres, you can then work out the MPG using...
my 2001 1.2 16v does around 400 miles between fuel stops, its got a 50 litre tank but takes about 40 litres each time I fill it so works out around 45mpg, that's mainly just a 15 mile each way motorway commute during quiet hours
easy swap, engine loom, engine and box, ECU & UCH
EDIT: actually might require a dash loom too, check and see if the 1.2 8v is a cable throttle and will have the different dials with the screen in the middle where your ph2 16v will have the small screen down the bottom right??
I run brembo oe front discs and mintex m1144 front pads, perfect combination imo for a fast road car, not overly expensive, easily available, work well from cold but a big step up in performance over the factory setup
Successful first drive! ive been running about in a 1.2 16v for a few months so it feels fast :ROFLMAO:
Going into the wheel specialist for a wheel refurb and fresh rubber next week (GOLD!) then wheel alignment, MOT and CSF!!
What's the best product for black plastic? I've always been a bit old skool and used the same products for 20yrs but I gather there is probably a modern version that doesn't wash off with the rain 😂
https://archive.org/details/win-7-pro-32-64-iso - Thats your image files then the windows 7 USB tool mentioned above or Rufus.
depending on the age of your thinkpad it may already have a 7 pro key via SLIC in the bios, if not there is ways lol
Get a seal kit and a new condenser, replace condenser(AC radiator) and all seals while refitting the 2 pieces of pipework that come from the bulkhead to compressor/condenser and have a garage leak test and regas if ok.
when my high pressure pump went and started killing injectors this is what i was getting. It started only happening at 70mph then worked its way down until I couldn't do 40mph a few weeks later!