Search results

Rear Passenger Sensor - https://www.buycarparts.co.uk/triscan/7659430 Rear Driver Sensor - https://www.buycarparts.co.uk/triscan/7659429

I remember doing World Series at Silverstone in 2010/11 I think it was.

Be fine that.

It's crazy really, brand new cars having to be kept on charge because of design issues 😏

Has the lithium battery died in it yet 😂 There's been loads of problems recently with them.

He means the one that bolts to the bottom of the box and sits on the subframe on a rubber block.

Fine mate, probably better than standard because the OEM ones are plated metal, these are anodised aluminium. I've built a set with these and also ones for a mate. They slightly shorter in height than OEM but it's negligible. Really easy to rebuild those Brembos.

These are the pistons you need mate...

3 13mm bolts on the gaitor to get it off the box. ABS sensor is just tight, wiggle and pull and it'll come apart eventually.

Track wheels cleaned ready for Wednesday at Donington. Doubt I'll get to use them though looking at the weather forecast.

Flanged nut usually, possibly serrated to help it stay tight.

They do a decent enough job, but £350 would only just about cover 3rd and 4th gears, synchros, hubs. Take 'everything' with a pinch of salt.

Yeah mate, they're M7 x 45mm 10.9 grade cap head screws.

R-Sport They supply all the Cup Racer stuff. These were used on the MK3 Clio racers but they fit the 172/182 as well. 77 11 051 262 £ 1.46 plus vat each 77 03 055 031 £ 1.95 plus vat each 77 11 162 626 £ 70.65 plus vat each Shipping would be £ 10.00 plus vat.

Tbh it's not worth the hassle unless you have all the tools, pullers, press, dial indicator for measuring bearing preload. Send it to @NorthloopCup and he'll do it for you.

If you're having the belts done, fit one of these to help prevent aux belt failures taking out your cam belt. For the sake of £105.

Yeah, ideally you wouldn't have any coating in the tapered seat where the bolt head sits.

Very good point that. No powdercoat between the beam and stub axle faces.

Because GTA 6 isn't out? 😂

Yeah all good, as long as you use high tensile 10.9/12.9 grade stuff and torque to 30nm and 60nm respectively.