Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
i put mine in the current ones position,its dead easy,only a few simple screws to remove top of the dash. www.fubarnet.com has a guide for it.
as for wiring you can either drill through the original block and use your own wiring or use the original wiring to do it and connect it to your...
no need to upgrade the hu wiring if your not amping your speakers
hu's removal is easy you dont need a guide
speakers are easy to replace if its straight swap for a set of co-axials, components slightly more difficult
its not wired in the same loom until deep inside and you wont reach it.it should be behind the dash somewhere,have a good rummage.lol.
the 3rd block is 3 times the size of the yellow plug because there are 3 different blocks that go in that plug all at the same time.
hes on about the standard one,the little yellow plug goes straight into the side nearest the edge of the radio,left hand side as you look at it from the front
ive seen them on ebay for 20 quid.they the right ones?
http://cgi.ebay.co.uk/Renault-Clio-2001-on-Front-Grill-NEW_W0QQitemZ170092658770QQcategoryZ10410QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
cut the plug off,strip the plastic cover for the first 5mm or so off the wire then place the terminal on the wire,then crimp it,jobs a good'n,repeat for each terminal