Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi there just fitted a brand new piper cat back system all the exhaust mounts are fine however the tail pipes don't fit inside the bumper cut outs centrally, they are mm's away from touching the bumper cut outa on the left hand side and need to be moved about a cm or so right so they fit...
Plugged rs tuner into car and this fault is in its memory and also present, i erase and then refresh and its still present however the eml does go off for around about 20 mile and then returns. The name of the fault is: rear 02 heater fault on activation. Is this the post cat lamba? Or something...
Before i start don't slate me! I'm not some chav whos going to be flat out down the Main Street popping and banging all night once i get it mapped lol, simple question really what are the cons from it? I presume to get the actual pops its over fuelling? Can this cause stress to engine...
if your looking for a good starter kit have a look at car-chem they have a 25% sale on aswell this bank holiday, they are getting good review over on detailing world, i got 500ml shampoo that 1900:1 and a drying towel plush lambs wool wash mit all for 15quid deliverd
took forever to upload pic from photobucket so carnt be done with doing it again so here the link to my thread on detailing world :)
http://www.detailingworld.co.uk/forum/showthread.php?t=308147
I've noticed on both cv boots there isnt a cir clip keeping it on only a cable tie :/ is this normal or do you think they've had the boots off packed with grease and then used a cable tie instead or cir clip? This is on the side closest to the wheel, also there is a small amount of grease...
ust checked 3-1 for smartwheels on norm so maybe try neat and see how that goes? where did you buy the smartwheels? from a rep or ebay? rumours have it some ebay sellers water down the product so your not getting it as full strength? try a fallout remover after the wheel cleaner it may be...
smart wheels is a very good wheel cleaner, make sure your dilution ratios are correct i think 5-1 is what is the norm or 3-1 for very badly baked on brake dust, sprayed on a wet wheel left for a minute then aggiated with a good brush (vikan or ez) then washed off. hey presto! once fully cleaned...
which product do people recomend between carpro flyby30 and gtechniq g1 for glass?
and also what for exterier plastics? carpro Dlux or gtechniq c4?
cheers