ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. 4

    Valver chip

    If you get one, let us know what there like
  2. 4

    Amp/Sub cuts out when moving

    Bad connections? Alternator output too high? Don't know to be honest, never heard of an amp doing that before
  3. 4

    Centre exhaust on valver

    The K-Tec Racing centre exhaust is straight through isn't it?
  4. 4

    Centre exhaust on valver

    Hey people, has anyone replaced there centre exhaust pipe with a straight through one? I've got a de-cat pipe, a magnex centre section, and a piper 3.5" tail pipe. I thought about removing the centre one for that little bit more power, but don't wanna lose too much back pressure. Has anyone had...
  5. 4

    power module ??????

    Basically it's just a resistor that plugs into the air temp sensor. This makes the ECU think the airs colder (more dense), so chucks more fuel into it. I have a similar thing on mine i made myself with a switch and whatever, basically when i turn it on the air temp goes down by 14 degress. The...
  6. 4

    help needed with torsion bar?????

    it should just screw in. is there a one-way clip in the way? some of them had one in there to stop the torsion bar from coming out (don't think it's gonna fall out some how!) remove it using a screwdriver and a pair of long nose pliers. if you haven't got one, i can't really help. the bar is...
  7. 4

    What is this?

    I'm sure it just pushes onto the bottom?
  8. 4

    What is this?

    It clips onto the bottom of the window, just pushes on. I don't think they do anything and are always falling off. Mine fell off, put back on, fell off again, went into bin!
  9. 4

    Halfords "Free Install"

    K plate, i think every mk1 clio have them, and poss the mk2 as well
  10. 4

    Halfords "Free Install"

    the good old mystery socket aye? ...it's for the auto gearboxes i think. Sorry if I ruined it for anyone! :-)
  11. 4

    Electric Sunroof problem (Mk1)

    It's prob the gears inside the motor unit broken. Replaced a few of these at work now, there expensive though. Nearly £150 I think last time I looked. If you can get the part, it's not too hard to replace so could do it yourself Chris
  12. 4

    valver power steering bypass

    u wont get much more power, considering the pump only using a lot of engine power on full lock. best bet would be to call Power Racks Direct for a re-conned one. Prob only be about £60? My rack went on mine and the steering went light as anything like a biddy mobil, cost half the price than a...
  13. 4

    valver power steering bypass

    cant see the point really, only if ur going light weight, in which case change the steering rack to conventional.
  14. 4

    how old r are you and your sport

    20 in two weeks, valver (which is for sale) paying about £1300 on own insurance. I want a Nissan 200sx !!!
  15. 4

    Caliper Painting-Your view

    A friend of mine used that high temp hammer right paint. you dont have to mix it unlike caliper paint, and it drys quicker. I have to say the final result looked well good.
  16. 4

    renault clip software

    this is good bit of kit, but should come with a little folder of paper. Basically this machine only illuminates bar graphs (20 in total). you then have to look in the folder and it shows u what it means. (the meanings change depending on what computer its connected to ie, inj, auto, abs, etc...
  17. 4

    renault clip software

    Hi, The Clip connects to the lapton via USB, then another USB lead from the Clip to a little box called a CAN. Dont know what CAN means but its something to do with the Renault computers are different language then normal PCs / laptops. From the CAN is the normal 16 pin EOBD connector. Dont...
  18. 4

    Alpine system

    Alpine are prob one of best makers of ICE, and for that money its a margain. Shame the subs let the package down a bit. Can you upgrade them?
  19. 4

    Clocks stopped : ( Mk1

    Hi, if your talking about the 3 clocks in the middle, i think i might be able to help. First remove the top dash, only 5 screws (20 torx). Then from memory i think there are another two or three holding the clocks in. Make sure you have the common earths and feeds (12v) using a multimeter...
  20. 4

    Whats does this plug do

    I think this plug connects to the automatic gearbox lume????
  21. 4

    Lights Flashing

    I had this problem once, i had to run a seperate power lead from the battery to the headunit. It doesnt have to be huge stuff just enough to take 20 amps. It didnt stop it completley but helped a lot.
  22. 4

    Thorney Island Car Show

    Excellent day out mangaed to get me and the girlfriend in for a tenner, and a pint was only £1.50 The worst bit was the queues. Took about 45 minutes to get in, and just as long to get out again! My Clio 16v overheated, ended up pushing it some of the way, and was still moving just as fast as...
  23. 4

    Thorney Island Car Show

    Did anyone goto the Thorney Island car show yesterday? Just wondering because no-ones mentioned it, and it was fecking excellent!
  24. 4

    16v Temperature Display

    mine went wrong once and stayed at 50 degress, i put a new one on it now works fine (the sender under the mirror that is) there quite dere tho so go to the scrappy first
  25. 4

    Lockwood White Dials Valver

    every 16 valver ive seen has got sagem dials!!??
  26. 4

    Member Trouble.........

    Hey people can someone help please? Im a member on the forum, but when i go to log in it goes to normal screen again, and cant see the members only bit. Any ideas, cheers.
  27. 4

    FAO: Valver owners

    Im 19 paying £1100. 1 years NCB, CAT1 alarm, and everything declared. (exhaust, induction kit, suspension kit, wheels, £1000 sound system(only covered for £250 tho, etc) Good luck with the price!!!
  28. 4

    Valver - alarm, immobiliser etc

    The button on the end of the wiper stalk is used to manually code the immobiliser if you lose the plip, or the battery in the key fails.
  29. 4

    Dials Replacement

    yeah looks quite smart just a matter of choosing a colour...
Top