Search results

there is only 3 mounts. one is under the battery tray on the gearbox, the second is next to the cams, and then there is one under the car at the back of the engine bolted to subframe. do a search on "dogbone mount"

i think i saw him too. i was on the island, actually on the island weeding the flower bed.

you can go as dark as you want on the rear but i think on the front its about 70% but most cars now are slightly tinted anyway. its only bout 100 quid to have it done properly.

somebody must know........anybody

no actual details bout the leds

im looking to chane the illumination of my aircon to blue but i need to know the physical size of the led, the wattage and the current which they draw.i can get the led's but need to know which ones to get. Has anybody done this and could help me out. are they the same as the dial illumiation...

auto glym tar remover

i aint got it.

i can get them painted for 35 quid. Thats all 4 weels Just painted thou not a refurb

do you need a refurb or just a spray job

wouldnt i be able to smell it thou? why is it only pulling high up in the revs?

i was sitting at the lights with car in first gear and foot on clutch all the way down. showing off to my son i was gonna rev it so it bounced off the limiter but at about 6k revs the car started to pull away but it was juddering. there was a light slightly flickering on the dash but it didnt...

the ht terminals are where the ht leads connect to the coil. not sure bout the pin number but if yo do the first 2 pins and they read 1.5 then they are pins 1 and 2. then the other 2 pins should read 0.6 being pins 3 and 4

test the coils D7F Engine Terminals 1 to 2 = 1.5 ohms Terminals 1 to 3 = 1.0 ohms Terminals 1 to 4 = 1.0 ohms Terminals 2 to 3 = 1.0 ohms Terminals 2 to 4 = 1.0 ohms Terminals 3 to 4 = 0.6 ohms HT Terminal to HT terminal 8.0 ohms

have you got a ohm meter

its gonna be something u forgot to reconnect

is the immobiliser turning off. wouldnt of thought it was coil or leads if it started before you done the gasket

nah cant adjust the timing. need to figure out y u aint got noting coming from the ignition coil

how have you tested for spark?

have you connected all wiring??

yep

my mate put his on the wrong way and it wouldnt start. i spun it round and it was away

not that i know of. are you sure it on the right way round

tdc sensor

i wouldnt mind two of these if anybody got them

what makes you say that? is there much difference to the renault tool

http://www.amazon.co.uk/dp/B004A68CAK/?tag=cliospnet01-21 Will these do the same job as the renault tools?

anyone know where i can get a wiring diagram or shall i just go and buy a haynes

what led and whats the isofix bar???

my missus was out today and smoke started coming ot the driver side door. ive removed the handle to find that the wingmirror switch had fried and melted all the wires. Now there is no power to air con controls, clock and the door open light is on when doors are shut. Ive cheaked all the fuses...