Search results

How much would it cost to get a set of throttle bodies for the clio 16v? if you have chip cams and these what sort of power should you expect??

I want to take out my fuel cap and weld it over and relocate it to behind the bootlid. Does anyoone know how you remove all of the pipework under the drivers side rear wing and also if there is another blanked hole in the tank that you can connect a new filler pipe to?? Has anyone already...

I have just installed a new wiring loom in the engine section of my car which i bought off the forum. I connected it to every ancillery on the engine, one end to the ecu and the other to the relay box besides the battery. when i turn the key on all of the dash lights come on and one of the...

Anyone know where you might get one of these from and possibly whats the cost?

would it be possible to fit a standard clio MK1 rear beam to a clio 16v and then use spacers to bring the wheels out enough to get them properly in the arches?? I am looking at how big a wheel you could fit in the arch before if fails the outer casing of the torsion bar?? Anyone really know...

How difficult would this be? what would you need to do the conversion?? a complete doner car?

What is exactly involved in fitting a gt turbo lump in a clio 16v?? has anyone got a very quick one??

Does anyone know how much an engine rebuild would cost?

Does anyone know what the correct timing would be on a valver running piper cams and vernier pulleys?

Has anyone tried to fit a honda civic type R spoiler on a clio tailgate? Any pics

I would like to know the part number for the clio16v exhaust heat shield??

Does anyone have some fitting instructions on how to install a FSE power boost valve on the clio 16v? Could you please post up with any pics? How do you set the device up??

I have managed to get hold of a Clifford Concept 300 alarm which was taken out of a written off clio 16v. The alarm is complete but I would like to have it installed into my car. Does anyone know about the wiring of these products or can recommend a car sparkie to fit it? im in the herts area...

Can this be done and is it expensive??

Im looking to source some chrome or stainless steel switches? for hazard lights, electric windows, fog lights, rear heated screen etc to replace the ones on my clio 16v? make them more custom? Any ideas?

My clio is on the front cover of Revs this month!! After a years hard work i have finally achieved front cover! Hope you like it! except the colour in many cases!!! Thanks to lots of you for advice and support along the way!!

Is there any way of testing the engine rubbers in the clio 16v to see if they are knackered. as my engine moves around a lot during idleing?

I need to put a pop solenoid into my boot to pop it open but I cant understand how you might get the mechanism i have to pop open as you actually have to pull the lock? How have others done it?? Help!!

I am having trouble with me valver gearbox. i have just taken the engine out of the car and had it overhauled etc and now have put it back on gone to connect the link bar. i do not seem to get the car into gear? only reverse! all of the gears seem to be rock solid and the clutch is so soft its...

where can I buy mesh from as cant seem to get decent sized sheets from anywhere??

Look at this site http://www.tgincar.co.ukwww.tgincar.co.uk We should try and get a group buy together!! Heres what they charge: (i want to get them a bit cheaper tho) Sunvisor Tvs built in: - 5.6" = £99.99 - 6" = £99.99 - 7" = £109.99 - 8" = £129.99 Standard Screen: - 4" = £69.99 - 5.6" =...

Just put my engine back in my car and have connected it all up and is running beautifully. but the clutch pedal is so light and does not appear to be doing anything to the clutch? i.e does not move the clutch fork?? what can I do?

Does anyone have a viper cone on thier clio 16v? if yes could you possibly give me a close up picture and also the diameter at the end of the filter that joins the bit of flexi pipe? also what does the apator look like?

Has anyone put a tv headunit in the heater controls in a clio 16v?? the gap is headunit size?? how did you do it and could you help me?? Thanks

I have just put my engine back in the car and re connected the clutch and it does not seem to be engaging the clutch properly? pedal feels really light and does not pull the cable more than about 5 mm?? not enough to hardly move the fork on the gearbox?? HELP!!

anyone had a custom stainless exhaust system built for there car? where did you go for a good price?? any pics could youi post them up??

I wanna have my torsion bar lowered on my clio 16v. I wanna do it myself! how low should i go? I have just fitted -60mm suspension kit on the front of the car and its dropped a lot! how will i take the back down? i was thinking 2 splines?? Help??

Does anyone have a tv headunit in the dash in the clio 16v mk1? Any pics please? where did you fit it?

where can I buy polished aluminium dials for the clio 16v?? how much??

Can we buy cheap parts from renualt? i thought someone on the forum worked in a dealership?? I need a rocker cover gasket and inlet manifold gasket ASAP? Help!!