Search results

Nice work with the inlet manifold ! How far you taking it power wise ? Losing the aircon etc ?

+1 I do this when working on desktop pc's lol saved my ass a few times

Just me whos loving that Lutecia badge ? <3

PM me if you get stuck on anything, I will try my best to help :race:

Looks the biz ! You doing 25 front and back or ? :rasp: Eager to see how it turns out, looking to get a set for mine :)

Not to mention if have been done incorrectly in the past it can takes ages to sort, my mates megane's old discs had no copper slip on the hub and the disc was so bonded to it we had to hit it with a stab hammer to get it off !

All you need is an electric "supercharger"... honestly ;)

I'd make a list of tools you will need and go from there, if you have not got the tools I wouldn't start - It's a precursor for a lot of swearing. If you have the tools just read up on the guide's but personally I wouldn't be touching the brakes if i was not sure what I was doing. looking to...

Hmmz is this "Bottled" power by any chance ? ;)

Just spotted this thread, Sunny Shields here :rasp:

Paint correction is the normal way, if it isnt so bad you could try the "Filling" route - something like SRP would do you dandy for this.

^^ dab o boost ? :P

wtf is that ! never seen that on a clio before ! Edit: As suggested above, it looks like velcro - possibly a hands free part ?

Avoid smelling the IronX, it turns your face inside out -> :dead:

Cheers Fred, I'll get the cash together + contingency. 2 small questions I'm guessing you will need to hold onto the car for a few days and as the engine is coming out would you change the manifold to a 4-2-1 ? Only reason I ask is because I hope this is the last time it's out and there an arse...

http://www.cliosport.net/forum/showthread.php?576582-Moving-the-gearstick-back-mod&highlight=Gearstick+mod There ya go chief

I think this is lack of lube on the sliders, mines knocked since I got it and ive just had to tackle 2 seized sliders and 2 dry ones... Check ya lube !

Gear linkage been adjusted ? Sounds like the problem I had fitting stiff shift kit, I'll get you a thread that may help 2 ticks

Dread to ask the question, but how much am I looking at for full belt change with depahser and water pump and sorting that gearbox (assuming it just needs a small repair and not a full rebuild)

I've got a vid from inside the car which shows a slightly bobbing idle, I was going to get the belts changed soon anyway to be honest along with the water pump and dephaser so if it is shot it's no biggie (Unless it goes between now and then) New ICV fitted also (Oh its also worth mentioning I...

Which one Danny ? if I depress the clutch the noise does quieten down a little from the gearbox, if I prod the accelerator the noise increases with the rev's but I'm fairly certain there isn't any knocking from the left hand side of the engine, just a light tapping/clicking from the front/middle...

Most of that noise is from the gearbox although it is difficult to make out, there isn't alot of noise coming from the cam cover area - more from the middle of the inlet which im guessing in the injectors

Aww man don't say that its looking expensive as it is ! Do you do gearboxes Fred, looks like you will have this on your hands soon lol

Might have to turn the volume up a bit, ignore me trying to get a good position with the camera - was trying to not lose my hands to the rad fan lol

Got a strange niggle (That will no doubt end up being a huge issue) from the gearbox that I've not seen before. Basically on idle the car ticks, now the confusing part is it isn't the engine its the gearbox ! Looking at the fork I can see it wobbling like mad :S depressing the fork lightens the...

Scrap it !

Avidly ;) But seriously give them a call, very friendly (01302) 867985

That looks ready to roll :eek:

Does my OEM clear side repeaters count ? ;)

Just been through this one myself, it takes time (Took me 2 days) to get right but the quality was good. Small drill and take off the rubber connector between the door and car and enlarge 2 of the holes (Some are unused and some have wire in them that serve no purpose, just check to see if it...