Search results

for that price i'd get this

well not really as one half of the cpu is always at 100%.

now i noticed that my cpu seems to be running quite hot(well the fan is spinning fast and there is a lot of hot air coming out the side of the case) now i just checked my load average an it seems to be floating around 4.xx now i'm sure this used to be about 1.xx at the most. i was just...

when someone say tuning a sub box is that they tune to box so that it resonates at a certain frequency. this is done by altering different things like port length,shape,size and box size. thats why i prefer a sealed box as it gives you a more even sound output with no real peaks where a ported...

lol you could hang about 5 tv's off one of those

you could have 1 volt preout's it makes a blind bit of difference, you just have to set the gain accordingly. as for cable yes get a good set of rca's but the supply cables just have to have the right size c.s.a. i wouldn't give a f**k if it was made by poundland or harrods.

nah it looks like ddr2 in your new laptop so there would be no benifit

try to boot off the windows cd in an external cd/dvd drive. you'll just need to adjust your settings in bios

it's going to be rubbish trust me

no you can't just solder the 6x9's to a phono plug as it won't work. the only way you could get the 6x9's to work would use the speaker outputs from the hu

those plugs on the back hu unit are preouts they send a signal to an amp and you can't connect your 6x9's to them

right then lets get a few things straight. the best way to run a sub in is give it it's full power from the start other wise your not going to run it in. a cap just puts extra load on the electrical system as it draws power away from the amp to charge it's self aafter it's been depleted...

sweet cheers fred:D

phone number for matt?

bump

do it online?

yeah but tbh 70w is f**k all. i wouldn't think of driving a sub with less than 150wRMS

basicly means you use the two rear channels off the hu to drive a sub but it goes through a lpf first.

on the mk1 clios there lamps not led's. and i'd leave those dials alone as my mate bought some and they were just laminated paper print out's of the dials

you or renault?? if you, prepare to get your are removed lol

will the block of a megane 1.6 fit in the place of a clio 1.6 block? and will it work with the wiring loom ?

mine snapped at 57k and nearly 5 years on my 1.6. so get it done before it goes trust me

sorry but a cap can't help voltdrop across the supply cable. most distortion that people get is clipping hich is here the output voltage is trying to be higher than the voltage rails that supply the output fets inside the amp. + when the voltage drops the cap supplysa power to all electrical...

bigger cabling would be my first port of call.

a 50w amp can power a 2kW sub without sending a clipped signal to it. it's trying to get over 100% out of an amp without knowing what you are doing and having the right tools

anyone know the rough cost to get a new 1.6 16v engine fitted into my car at a renault dealer. i know they all have there own prices so i'm just looking for a ball park figure. or if someone could tell me the price of the engine would be a start.

as above dual 4 ohm voice coils can be wired for either 2 or 8 ohms

does anyone know what the difference between the 46" M86 & M87 samsung lcd tv's ??? i've looked but can't seem to see what it is apart from the price.

not a slight chanceother wise you'd have to run them at full blast all the time;). pick what ever amp you feel like just look for the things that will give you the best SQ.

sounds like to me that you are getting clipping as you or overloading the amp inside the head unit