Search results

i got a text on monday only been with orange a year now had so many problems with them will go back to o2 once this contract runs out i down graded my tarriff last month as i rarely send pic messages and saved a few ££ http://link.orangeworld.co.uk/studio/paymchanges/planupdate/

the aim wont be low due to suspension as that would mean the rear end is higher than the front end and both aims would be low not just the nearside. will need adjusting get them to do it as you need the beam setter to see the image and set it correctly going rate is about £16

what money have set as a budget for more power?

how does it feel like compeared to a standred engine now? just bought cams and a raceland 4-1 manifold and decat for my k4m. could u not just drop a k4m straight in on ur loom and ecu as they use the same sensors ect and the ecu can adjust itself? mate dropped a ford 1.8rs engine into his...

manifold and decat sorted :). if i buy an rs tuner do they do a map for the k4m? can i live map my ecu with the rs tuner? if i get a map made can i alter it my self via the rs tuner?

205 55 16v or sometimes w are cheaper is one of the most common sizes hence they are cheaper and more choice the will fit urs. if your doing alot of motorway driveing go for something like barum bravantiuris, conti contact, bridgestone er300, dunlopfast responce will last alot longer than most...

pi are cheap and not bad in 30mm 60mm is a very hard ride :(

got the kit will be doing mine in the next week or so. would be interested in reading the renault how to.

got a set of catcam 704s on there way to me :) also may have sorted a manifold and lightened flywheel.

have a look at my project thread my rsi is odyssey blue with black wheels

if there is space im interested in running my car

http://www.ebay.co.uk/itm/320796662122?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_949

2 months ago i managed to get hold of a completed engine and gearbox at a very good price. so have removed my engine and gearbox as i want to rebuild the engine replace the clutch and fit the replacement box have striped it down replaces the bearings and seals. the box that came with the car has...

i bought the car standered cheap with no mot tax and a gearbox fault. did the mot only needed 2 bulbs and all 4 springs where broken advised on tyres and the centre and rear exhaust. first off was a set of pi 60mm springs to get it through the mot at work could get a good price on a janspeed...

haha how did u know it was me?

is the car charging the battery ok? sometimes it takes a good long drive for the ecu to run self tests and restore its settings.

shouldn't need to adjust them if its been lowered. take it to an mot centre and get it setup correctly national tyres charge £16 to do it.

because the mot is all online now the new mots are just recites for your records

its all wear and tear stuff that can be on any car. best bet is if your getting a garage to do the work ring a few in your local area to get some quotes.

national tyres and kwickfit both send out mot reminders. national tyres mots are only £35 if booked on line some of the national centrers are even doing them at £30 e.g bristol and test 7days a week.

sunday 16th of oct is when the new plain paper mots started. on the on green vt20 in the bottom left corner is where the reminder sticker is

if a traffic officer stops you its possible for him to issue a prohibition notice if you don't have a current mot. moted 3 cars recently with prohibition notices on one guy had 2 tyres with cords exposed he had to have the car trailered to the garage to have new tyres and have it moted before he...

btb do a modification on the 172/182 cat to the front joint radius as it slightly restricts flow in standard form wont see any real gains unless running over 200bhp. as from the first of january every car fitted with a cat from 1992 onwards must have a cat to pass its mot.

the springs will fit ok. can get some 90mm custom springs that would be the better option

do the rstuner do a 1.6 16v map?

yeah my rsi has a precat hence main reason i want to change it. no problem with emissions im an mot tester ;)

got a 1.6 16v rsi will be removing the engine and gearbox very soon with me changing the gearbox clutch also will be doing the cambelt and waterpump. would like to do a few mods looking for some cams uprated exhaust manifold and a remap can get my cams reprofiled for £200 and was looking at...

likeing the front lamps will be doing it to mine soon nice looking car not to keen on the alloys prefer the oz ones.

ill the 172 dogbone fit my 1.6 16v rsi? want to uprate the bushes.

is there alot of difference in performance from the manifolds?