Search results

Chip, if you listen at 4 min onwards on your video your car is rattling its ass off, you can even see it detting looking at the exhaust fumes

Take your blinkers of and have a proper read of whats been said, it's not about slagging them off

I assume you are trying to delete the codes with the engine off and only ignition on? I see battery voltage of 14.8 so that suggests it's running, if it is then you cant erase codes

Could be the PAS pump if it's when you are turning.

If there's enough interest we could arrange the burger van to be on site all day again like we had yesterday for vectra c and vxronline.

Not with the off the shelf map but you can flash open cal files with them too I think. Mine is a master so that's open regardless

You can map the second sensor out no problem

Rings will probably be stuck if you have no compression. Generally the 1.9 dci's are worse for that though

the 80's and 100's run different rail pressure and duration

Injectors going 100% at 5k causing high egt and boost spike is my guess

The stock intake is 33.5mm and the exhaust is 29mm

But the stock lifters are reliable at 7800 so whats the point? If you want to run a cam with much more lift then thats fine but otherwise don't waste a lot of time and money doing it. I have a set in an engine i'm building at the moment and they are a work of art but at nearly £3000 for the...

Reliability on what, a stock hp engine? High comp NA? Boosted? stock revs? high revs?

Torque and power will only cross if both the X and Y axis scale is the same. Nothing to do with sync or anything else.

The G4 is pretty nice to use and tune IMO. One of the R33 drift cars we look after runs one, much prefer this to a lot of others out there.

Use the 630's yoi won't have any issues with those and you have enough to go for 400 if you want

There's always going to be things like that going on and we often laugh at some of the rubbish the specialists sell as the next best thing but what does that have to do with a customer posting positive feedback from one of our custom maps? We have never been here to rip anyone off and pride...

Yes 6 files in 20 minutes, they take seconds to load to the car and changes are quick to make in the fuel and spark maps. What goes on in the world of the traders then?

Its not all about the end dyno graph only showing gains at WOT, it's about how it picks up when you initially go for it, midrange cruising and how smooth it is. It's very rare that i have put a final map from one car onto another car and it be the same. So yes there is every point

How's loading a GENERIC map the same as having a car mapped on the dyno? I did 6 files for this car before we came to this result with the chunk of midrange torque and disabled the second 02 sensor.

Low based on what? Thats an average realistic figure for a 172, as is a 4-6hp gain from a map alone.

Why ouch? Because it's not making 10000000hp from a simple remap like some quote?

Glad you like it Dave :)

If AT says 14 and IT says 33 (cant quite make it out) then it's over corrected and is actually about 5hp less than shown.

s_HP is fly on a DD

It's crap! The ends fall off if you move it slightly wrong

http://www.pistonheads.co.uk/sales/4227508.htm

They ran that in the wrong shootout mode by the looks, it was run in 4f which is 4 turbocharged 4 cylinder. Calculations are similar to shoot 4 though....

We helicoiled speckys tigra when it was running 600hp and it was fine! Did it in place on the dyno after it blew a plug out too! Plenty of grease to catch the bits and it will be fine.

The steel used is rubbish usually and they WILL crack!