Search results

Bought an FMIC with 2.25" outlets, but unsure whether to continue on with 2.25" pipework or go down to 2"? 2.25" would be easier with fewer reducers but don't know if the this is the best route to go? If 2" would I be better using a silicone 70-50.8mm reducer on the TB or reducing with silicone...

If 182 cup PACK then springs are different. You're 100% better off buying some eibach or cooksport springs

Hi Paul, Post pics of 197.

Mental the amount of stories you hear of the spacers being completely missing or in the wrong place. Takes 2 minutes to google where they go if you dont know! Crazy crazy

Stop being a baby

Buy this as a replacement - https://www.ebay.co.uk/itm/Car-Engine-Battery-Earth-Lead-Strap-9-24-Inch-50-mm-Sqd-Choose-Terminal-sizes/322796129172?ssPageName=STRK%3AMEBIDX%3AIT&var=511918310187&_trksid=p2057872.m2749.l2649 First terminal: 8 mm hole Second Terminal: 10 mm hole Length (mm): 228...

Not fan, looks like a decent job though!

Clean the crank first as you said. Then try bump starting... Is the immobiliser light going off?

Yep it can be dropped in from above but you need to get under it to manoeuvre it. Look at my thread where I post a link to the guide and the exact position it needs to be in. Fit heatshield whilst starter is loose and from above

Last seen, august 2015. Not holding out much hope mate!

I run a scenic shifter that I modified in pretty much the same way as the BMS ones come. I'm running a heatshield and decat but there is room. Have to bend the heatshield around so it doesnt catch and I also sometimes feel the gearstick move if the linkage hits bumps with it sitting lower. My...

Get some mole grips on the number plate screws and mount the next ones with velcro or double sided tape

Wider is fine (TWSS)

You want 10.9 minimum

Never really updated this thread, but received the new subframe bolts and got them all bolted in. Then went around the whole front end with a fine tooth comb and made sure everything important was torqued and everything else was tight. Came across one bellhousing bolt that wasn't fully tight...

Noice, will get some ordered. I ran a sunstrip when I first got the 182, but when it was standard it looked w**k!

Link to sunstrip? looks good that mate.

That looks amazing for a spray job!

That's why i said it haha