Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
i would go for the wire on the regulator thats prob where its been done wrong.. im sure when you changed the window regs on the clio you had to get another piece of wiring loom as the plugs were different ??
i might be wrong tho !!!!!
lookin at that the throttle potentiometer could be the loss of power as it won't no where the throttle angle or thottle pedal angle is.
had this problem on the lexus 400 hybrid's they loose power all of a sudden thro the light on as its 1 trip logic. then it all comes back and your away ...
nope they are about that when they are new mines just done 70k and ive just changed them from the original set they dont brake much on the rear mainly h/brake use
easy way to find if the vac pipe is off/split pump the brake pedal a few times with the engine off then hold the pedal down and start it up if the pedal drops down a bit its all ok.
usually you can hear a sucking noise if the pipe is off louder than usual on ticke over and about 1500 rpm and...
well i found the wires for my cobra at the back of the glovebox after looking up from the floorwell.. i traced them out of the bulkhead into the scuttle panel CUT all the wires as they went under the scuttle and my cobra alarm has never lived or gave me any hassle since... so the circuit board...
its all built in to the siren unit on these or my 182 is and its under the scuttle on the n/s..... the wires come thro the bulk head next to the bonet pull cable there is a wiring loom what it joins into at the back of the glove box
check under the glove box at the back there is a wiring loom there with a 30 amp fuse in it pull the fuse it should stop the alarm going off... if not cut the wires to the siren and get a different alarm as the cobra one's fitted are sh*te
there's a set of new ones with runners and wires for the airbag on e-bay now !! his buy it now is 1195.....
http://cgi.ebay.co.uk/Recaro-Trendline-Seats-Clio-182-Trophy_W0QQitemZ120151329432QQihZ002QQcategoryZ10410QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
has any one done the boot pop from a alarm fob ?? any wiring hints or a diagram to do this ??i no i need a seperate motor and relay its just wiring it up thats troubling me !!!! cheers to anyone who can help
hi fitting a clifford alarm to clio 182 anyone no which wires to put the interior light connection to ? as it has a delay on it will it need a diode in the wiring as well ? many thanks
its better than losing it !! my mate got done by one of these lost 250 and a psp !!! paypal took the money back from his account and made him owe them. as stated in the terms and condition's etc etc
as above please i'm fitting a clifford alarm to my 182 and want to see where i can wire closure kit to. or if anyone has done it any info would be a great help
cheers mate i used to fit alarms a couple of years ago but i'm a vehicle technician so know most stuff about wiring etc but just not got a wiring diag !! will have to find the wires under the dash somewhere !!!
i'm after fitting a clifford smart windows to the 182 just wondering if anyone has done this ???
if you have which wires did you tap into or cut ???
if anyone has a diagram of the window circuit you could post up or p.m. me i would be most grateful..... cheers
as long as the test is pre booked it is ok to drive on the road.... but it depends what mood mr police man is in also i would think !!! if he wants brownie points he might just fine ya and take ya to court !!!!! LOL