Search results

Is this my old car john ?

I reckon the new owner will fit some next month .

There are lots of different interpretations on these regs, it all depends on where the event is held, Rear anti roll bars are deemed to be illegal at Harewood due to the suspension type must remain as per manufacturer ( torsion beam axle in the case of the mk2 clio ) You could argue that the...

- Buy a cheap 172/182 to modify leave yours alone as damage is inevitable - Spring rates will be too high for a cold 1A tyre (try cooksports on cup shocks) - rear anti roll bar not allowed as not standard fitment ( suspension mounting points ) so fit PMS axle stiffening kit instead - PS3 tyres...

It's a mechanics saying when someone has put lots of new parts on something to fix it rather than diagnosing which has actually failed. A decent diagnostic tech with a lab scope will tell you what the issue is, ( it's not always a component failure sometimes it's a bad connection or damaged...

Do a compression test, if that that doesn't show anything take it to a garage that knows how to use a lab scope it'll be cheaper than the old parts cannon

2 new cars and 2 old cars to choose from and i pretty much always take the 250k mile shitter, it's like a comfy old pair of slippers

New cars are boring, driving older stuff is much more of an experience

Classy looking vehicle

The 3/8 and 1/2 sockets are now 6 point rather than 12 which was the only thing I could ever knock them on before, mine are all used in a scrap yard environment and get serious abuse, the only thing I've had fail is a 3/8 breaker bar that I slid a tube over and the odd torx socket. For the price...

@leeds_182 are you needing a tank for the 2nd car or is the rest of it to knackered ?

You need a lock-up edit: sorry should of read You need locking up

Get it on hydraulics Jim, Selby folk need this in their lives

Yes but they're all to a toca minimum specs

I've downloaded the Fusion 360, will have a play with it over the next few days, thanks gents

That's CArD Paul

Recommendations for a basic CAD app for my MacBook pro ? I'm s**t with this kind of thing so the simpler the better would be good. it's to design inlet manifold flanges if that makes any difference. Cheers, Bash

flat floor, low side skirts and a diffuser at 7 degree ( iirc ) would be my choice

my worst loss was a new MG ZT paid £23k kept 18 months got £10k on trade in so don't feel too bad jim

Yeah that'll speed things up, advertise it before you pick it up

how many motors have you possessed ?

You have issues

I think you're bang on with the low port velocity, I'm having the same issue at the moment on the micra with some wild cams and a big port head

Whats the AFR below 2500rpm ?

Because MAP not MAF

Possibly just the spring rates were better matched to the NS2R or you were scrubbing more speed on the brakes with the grippier tyres

He was a fabricator at Ginetta then development engineer, now welds chemical tankers (and exhausts on the side for mates)

A mate in Kippax makes exhausts Jim if you want one making or yours modifying, this is one of his

Fanny