Search results

dont mean to sound rude mate but forget it. Even if you could find somewhere to fabricate custom manifolds, they would cost an absolute fortune. Then you have the issue of only 1 injector so fueling is going to be a problem. Overall much cheaper to have a 5gtt engine fitted

on a 16v 195/50 are fine, on a non 16v you would be better with 195/45 if you are planning on lowering it as they wont scrub. They might not with 195/50 but more likely to. I have 195/45/15s lowered 55mm at front and about 70mm at back and with 4 up on full lock there isnt any catching or...

Oh yeah and how long did it take them to do?

Very very nice Yeah can you tell us how much? I am thinking of buying a valver, but ideally would like to keep my clio (1997 low miles, lots spent on it) and just get more powerful engine

Cheers for the comments, Im trying to get the subtle look rather than anything too in yer face. Rick I know what you mean, after FCS I came away thinking whatever I do I have to get a valver somehow. Was thinking of putting all standard bits back on, selling in autotrader and buying a valver...

Can you get tilting subframes for the mk1 clio? Thereby allowing me to fit fixed back buckets and still gain access to the back?

Hey Rick hows it going mate! Yeah fitted it last weekend, I used 6mm nuts and bolts so there is no way that sucker is coming off. Very easy to do, it fitted the shape of the bumper almost perfectly, just needed to hold the sides in a little bit whilst I got jiggy with the drill...

its usually parked flat, I just put it like that for the pics

Now with Ibiza splitter, DTM mirrors, single wiper and twin exhaust. Bit grainy due to resize but I dont have web space of my own so: http://erc.qmuc.ac.uk/cliosport/file.php?image=1055010197__P6060015.jpg http://erc.qmuc.ac.uk/cliosport/file.php?image=1055011025__P6060024.jpg...

I spoke to them at FSC and also got a renault price list. Wasnt too impressed TBH I asked them what the measurements quoted on their Koni shocks were actually for (55mm and 61mm) and the guy just said "dunno"

Yeah the 54mm ones are too small (narrow and bolt holes too close) Thats the other measurement Koni use centre of bottom bolt to centre of strut body 55mm or 61mm Need to take one off and have a good look I think. What do valvers have? 54mm?

Alright mate, just wondered about your 200sx Is it an S13 or S14? Whats it like? Thinking of buying into cheapish RWD Turbo antics and seen a couple of S13s that I like the look of. Are they robust cars? - Most of the ones Ive seen have got quite a few miles on the clock Cheers for any...

Finally I found a company that do not think I am mad when I say the distance between the mounting holes on my front struts is 58mm NOT 52mm or 54mm That company is Koni, the only ones I have found to offer front clio struts with a 58mm gap (only found on 1.2 + 1.4 phase 3 clios made in 1998...

Personally I reckon Cup blue (dont know actual name) would look very nice. Different, fresh and still keeping it Renault.

Just wondered what these engines are like? How do they compare to valvers? Are they very tuneable? Cheers

How much you after for the engine? Would it include ecu, manifolds, coil etc? Oh and can I come and pick up the tailgate next Sat. morning? cheers Ben

I have 3 12" neons running off my boot light and its fine. Neons have very low current draw so you wont have a problem

Yeah jump aboard its only a fiver still isnt it?

Big City Tyres in Nottingham. Went on the recommendation of Daz for another Powerflow backbox. About 2 months ago I had a back box with twin square tailpipes fitted by Top gear in West Brom. I decided with the French car show on Sunday to have another one put on and ditch the spare wheel...

cheers mate I found out the hard way with the bonnet and got a nasty scratch on the edge :@ I will have to do it tomorrow coz I had already screwed everything back down and I was getting soaked coz it was tipping it down.

Go the kit today and fitted it with wiper parked on passenger side of windscreen. Was fine until bolted new wiper in place and it swept downwards onto the bonnet! looked at linkage and turn motor arm 180 degrees, then did it again. This time it swept up to half way then down onto the bonnet...

reckon that would look any good? Ill put some pics up tomorrow and you can decide :)

Well was last time I looked: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2415838662&category=9861http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2415838662&category=9861

oh yeah do I spray parallel to the mirror or follow the curve of the mirror? thanks

Got a set of DTMs I want to fit for SUnday, spent tonight shaping the baseplate to fit nicely. Now my dilema. I could just fit them and make do for now (black) or I could have a bash at spraying them. (got the primer, paint) + laquer Is it difficult, any tips?

Cheers mate, I tried it again tonight and it worked, albeit a little flickery. I think its drawing a lot of current. The beeping which I was worried about is the inverter alerting me to the fact that the battery voltage has dropped below 10.5volts It auto shuts off if it gets any lower...

no mate it doesnt say was hoping somebody might have an xbox in their car and be able to advise

Sorry to be a pain but I want to install my xboz in car for the french show on sunday. So I need to buy it, get it delivered and install it in 4 days! I need to know what power inverter to buy. I have a 150w, 240v inverter which powers my PS1 fine, but when I plug my Xbox in it beeps...

NO WAY!

http://www.espdesign.co.uk/www.espdesign.co.uk