Search results

^ They're UV coated so don't show the surface rust as much mate

Glad you're pleased with them Josh :up: @MattyPerkins I'd only recommend using either Brembo or Renault rear discs. They have better quality bearings in than the other options and will last longer. That's were the cost difference is, (and I can supply a lot of manufacturers including Mintex)

Drop me a PM if want info in bedding the DS1.11 Mark , they come with instructions and you're on right lines doing doing repeated "stops" but it's important they get really hot mate @seanconnolly same applies if want any help pal cheers!

Thought I had replied to this the other day lads The discs (any) will get surface rust on them, the rear brakes on your Cup don't do a lot. If it's the un-swept area of the disc, you can clean them and then paint them silver/grey if you want them to look fresher/cleaner. If it's the...

I've just amended stock on site mate, ta! Have plenty in stock, drop me a PM if wanting some cheers http://www.roadtrackraceparts.com/brembo-oem-brake-pads-renaultsport-clio-172-182.html

cheers lads @Bunta @Typhoon I can get you sorted with everything you need brakes wise @indycos Get in touch if need any help/info I have them in stock and ready to go. A lot of places at the moment don't have any stock of the rear discs and are on back order with Renault Will also...

Depends what sort of ratio on road and track, but for the more dedicated track car doing harder/longer stints. The DS3000 and DS1.11 are more suited , the latter been what I run and are one of the best pads around imo

No worries mate Will drop you a PM Dan with some info on bedding , but it's a series of repeated "stops" to get plenty of heat in to them

Glad you're pleased with the DS1.11 lads @MarkX @StuOwen86 :up: I can sort them with new discs @Greeny. They're one of the best pads around, I'm waiting for mine to come in from factory as I special ordered them for my mx5 track car as they didn't list them. So practice what I preach :wink:

will do mate For the harder/longer sessions on track get some DS3000 or DS1.11 in there Nate :up:

Yes and yes. The Brembo just edges it on the road from cold/less noise but the DS2500 are a bit better on track, at the top end with the higher temps. As you are planning to do track days and they are the same price I'd lean to the DS2500. I don't really notice the noise of brakes tbh as I've...

No worries Neil, the DS2500 working range is 20-500 deg C so don't need much heat in them at all Yes, the HP2000 are available and are similar money for the DS2500 in the Clio 197/200 front pads

The DS2500 are fine to use on a daily drive, work well from cold and are relatively quiet ime

If you have trouble getting hold of them/finding people with stock as usually special order from France , I have plenty on the shelf mate http://www.roadtrackraceparts.com/renault-brake-discs-washer-spacer-rear-renaultsport-clio-172-182.html

Think he has a 182 now lads (not updated his info/profile)

Proper set up that Matt, hope you're well mate. What I'd run and recommend for a dedicated track car/race car :up:

Good choice mate

Drop me a PM with what you use your car for and I'll get you some info/price across PS become a member when you get chance, will pay for itself in no time at all once you can use all the forum :up:

cheers Sonny, changed my name mate :wink: I can help you out with brakes @Crumbie

No worries mate, thanks a lot! Hope you get sorted and sails through mot :up: Russ is on here yes @Russ_16v

Fit them = Tapered side Towards car. Flat side to Friction (ie the disc/bearings)

You're welcome Ricky :wink:

Think they're on about the mk2 Meganes 230/mk3 Clio 197 Brembos mate @-Jamie-

FYI I stock pads for the mk3 RS Megane 250/265/275 Brembo 4pots . Brembo OE , Ferodo Racing DS2500, DS3000 and DS1.11 :up:

No worries @Tim. , happy to help out with your brakes mate :up:. Cheers and keep up the good work with the Trophy , the Brembo 4pots will be a nice addition

I can help out with the rear brake discs (with bearings in and abs rings so straight fit) check these are fitted aswel while at it if the rear bearings are droning: http://www.cliosport.net/threads/renault-spacer-that-go-behind-rear-discs-on-clio-172-182.712287/

Cheers lads! Just got your PM Phil :up:

Welcome along mate

Welcome along mate

Welcome along!