Search results

Indeed I've now had confirmation today from Chris that the PB is booked in to be at EFI on the 17th May.

Would be the finishing touch IMO when 16" anthracite Turinis go on. The Williams wheels should be back on the 5 where they're more suited (again IMO)

Ah ok, I wasn't sure if it was being mapped again. I spoke to Chris at EFI the other day and he mentioned working on a couple of 182 turbos this weekend. Out of interest does your cruise control still work? Assuming (Not read back a while) you're running Adaptronic

Was this fitted at EFI parts this weekend? I so can't wait to get the S/C Clio on the road

All graphs are supposed to have the torque and BHP line cross over at 5252rpm...... Something about all this doesn't quite add up, there must be more to this than what's been posted

He travels all over the world, he's been to Italy and worked on Ferraris.......Can CS not fly him over for CSS14 :D The way he talks reminds me of Bradd Pitt in Inglorious Basterds

From what Chris says is the Adaptronic runs in parallel with the OE ECU, this retains everything on the dashboard, the Adaptronic deals with everything else. There's obviously much more to it than that (and with me forgetting parts of the convo already!) But imagine the Adaptronic splices into...

A small update, now the Clio is done mechanically I've turned my attention to the whole mapping scenario. I've been doing the man maths over the last week in my head and what with the discussions I've had with 2-3 people, the next step seems in my opinion the best way. It's nearly £500 to have...

Now there's a boost hard pipe taking the place of the original induction run i can't put an air filter where it sat before with the K Tec setup (behind the passenger headlight) i've removed the injector rail guard to make way for the induction hard pipe run so where the new filter sits now is...

So, the final night tonight. I've just arrived home after seeing the last pieces being fitted, the induction run and the phase 1 fuel setup. I'm not that arty with the photos but here's a few showing the finished engine bay with the air filter setup. Now is the next step, mapping, although my...

When speaking to Paul at RS Tuning the figure of 250bhp was mentioned, I'd be pretty damn happy with that figure if it was achieved.

I did think for at least 1 minute maybe I shouldn't do this to a Clio in this colour...... And then thought doing a supercharger conversion would only make it better if it's done tastefully. I like to think that everything I've chosen for this project has made it look just right.

I don't think you will go far wrong with new OE dampers (172 Cup?) and Cooksports, the spacers will IMO give it just the right look. It will look perfect will all that fitted as well as a tidy wheel refurb.

You know how much I appreciate all the work you've done for all my Clios over the years :D Indeed, just the fuel sender unit I paid for nearly 2 weeks ago and still nothing. Naming and shaming next week sometime if they still don't reply to my texts.

Aaah ok, I appreciate that Danny. I have 4 restrictors made with different diameter holes that I can play about with on mapping day if needs be. The induction setup I have is pretty much the same as Doms on his Clio bar the air filter make.

If you're referring to the running the restrictor in the induction pipe setup, it's not fitted there. It's fitted post supercharger and pre FMIC

Looks really nice, I'm impressed with all the work that's gone into this. Agreed on the wheels, for some reason the OE 16s with a nice drop seem to suit the Monaco really well.

So, the final pieces of the conversion jigsaw finally fell into place today. After so many phone calls, texts and PMs I've managed to sort out the fuel system setup situation. Today I did a 110 mile round trip to Kent to make sure I had all the parts in my hands and know 100% they were all good...

Cheers Scott, that's excellent news. I bet you can't wait to have it back to put it all back together :D

As we had half decent weather here in Southend I decided to finish the induction setup side of things. It's all in 76mm compromising of 90 and 45 degree silicon bends, in between that I've also bought 76mm alloy hard pipe to use as joiners and as a hard pipe section to complete the induction...

Much appreciated, early phase ones (W and X reg) 172s should have the return line and sender unit with the 2 outlets

Nice 1 Scott :)

Thanks Alex, it'll be sods law a phase 1 will come up to break next week! Fingers crossed the problem is solved, I'd still like a second fuel return line as a spare though just to be on the safe side. I spoke to a mate last night and he mentioned kit cars using nylon fuel lines and nylon...

Re: The life of... SharkyUK's Trophy [& Fred's V6] Paint code for Trophy Turinis: Ixell 205-110

Not really much left to do really, the last week has been spent ordering the final pieces of the induction setup. So a 76mm 45 degree silicon bend and air filter all sorted. The absolute last part of the jigsaw has been the biggest ball ache, running the phase 1 Clio 172 fuel setup comprising of...

Indeed, was half expecting to have to pay for the 3 litres but quite the opposite :)

I paid £1450 for 99% of the kit, things like air filter induction run and spark plugs were missing. Along with the sundries such as the genuine cambelt kit, Valeo clutch, fluids, change of boost hoses, jubilee clips I think I'm up to about £2300. This also includes treats like the Forge silicon...

incy-spider this is the right oil isn't it? I popped into Renault earlier with the invoice to the parts department to have a word, they couldn't apologize enough for the error and even offered to change the gearbox fluid free of charge. Of course this isn't going to happen but a kind gesture...

I'm going to pop into Renault shortly, you'd just assume going to main dealers they would give you the correct oil having all the info to hand. I've just ordered the phase 1 Clio 172 fuel return lines so hopefully they'll be in by Tuesday or Wednesday. I've also purchased a second hand fuel...

All cool hence the reply, you learn something new as they say. I'll have to speak to the parts guy again, maybe he'll give me the right oil heavily discounted (or free) due to an error on his behalf. I'd rather know now than have something go wrong out on the road. Appreciate you pointing it out :)