Search results

Ive removed 2 out of the 3 but one of them just seems to be spinning. i can only assume that what the bolyis screwed into is rotating ! any ideas how to get it out. theres not alot of room to get anythink above !

can anyone post up or links of silver clios with different colour coding etc. This isto be track inspired. Not sure which colour combo, fluorescent green, yellow or orange or summit else ? anyone got some pics?

Whats the best tool to use ? I have a scorpion system to fit to my clio 172 and i think i will probably have to cut a recess in the bumper possibly. cheers mike

Ive never driven my clio since buying it a year ago ! Needed afew jobs doing in order to get it road worthy ! I'm almost there to get it ready for an MOT and tax but the power steering pump is leeking so i want to get this done before i take it for mot and tax. Is there anyone in the Northwest...

Any ideas where i can get a new one from ? anyone know the diameter type i need ? cheers

I am going to buy a stainless system prior to getting my car on the track, it is being set up for track days so will be running a de-cat also. i dont fancy a milltek or anythink like that. was interested in a k-tec or even the btb system. Has anyone ran the manifold of ebay ? are...

Do you have to take the exhaust off and heat shield to drill the 2 holes into the chassis. I was going to drill two holes into the exhaust channel but obviously to fit the stress plates underneath ? just wondering if i need to remove the exhaust and heat shields

Has anyone had this carried out ? What sort of time to complete 2-3 hours ? I'm going to get a new Pump , Pulley and belt from renault but i think i'm going to take it to get fitted and tentioned correctly. Any ideas on labour cost for this ? Unless there is anyone local who fancies...

I will be looking to purchase a full system for my clio soon. Which to go for Ktec or Yozza ? I doubt it will be this month as it looks like my PAS steering pump needs replacing so that going to cost alot of money for a replacement and to be fitted ! Not sure where to get it fitted...

I need a Full workshop Manual for my Clio 172 as i dont have information. I have searched on here and the RS tuner link does not work that i found. also found a website that has bits from a manua. can anybody help me please. :D

Started the car and a horrible screeching noise while trying to turn. Checked the resevoir and it has lost some fluid ! Either the pump is leaking or soemthin related ? Ive never seen the pump due to the position of it ! Any tips for the best way to get at it and remove it without any...

I currently have my 330 M sport Convertible insured with them along with my 1999 Nissan 200sx Turbo. I phoned up to change the policy on my Nissan over to the clio 172 and theyve told me then cant insure me on it because its a Sport !!!!!!!!! I'm 28 years old and 5 years NCB on the BMW...

Any ideas how to get this bolt out, it looks like the head is rounded from previous owner :( Any ideas how i can get this out, I know these are pretty damn tight snap fit fro removing the other one !

I have some sparco seats , subframes and sidemounts. I also have sparco 4 point harnesses. The problem is i dont know where to bolt my harnesses. I realise the rear of harness needs to be bolted where the rear bench was but where do i bolt the other two parts of the harnesses ? There...

Ive installed my Sparco F300 bucket seats, Sparco subframes and side mounts. I have sparco harnesses aswell and there are 3 mounting bolts, one on left hand side of seat, one right hand side of seat and one which needs to be bolted underneath rear seats. There is only one threaded section...

Just fitted new boot lock motor, connected up and rear windscreen motor. Boot lock is still not locking and rear windscreen wiper is moving ! could this be somthink to do with taking the stalks off ? I have noticed a thin green wire which seems to be disconnected or broke which must be...

Under hard acceleration in 1st and 2nd gear i can hear which i think is possibly the exhaust knocking on the subframe. If driven normally it doesnt happen so im thinking its excess movement. Would i be best buying a KTEC uprated engine mount ? I which one would it be most likely the upper...

Ive just connected my windscreen washer motor and mechanisms back in place. Ive noticed only two out of the 3 stalks located on the scuttle panel only rotate. Is this correct ? as far as i can see i think only two are driven offthe wiper motor,is the third purely a support or doi have a...

Can anyone advise of which colours i wire to the exisiting tdc wiring ? i cant find the post where someone said which colours to wire too :clown:

Anyone know how i can get the bonnet to unlatch ? Ive been re-fitting bonnet catch and cableive closed it try and it wont open ! I checkedthe cable end was moving when pulling the handleinside but once the bonnet had fully closed it wont release ! imanged toget the bumper of but even...

My car wont start, diagnostics are saying speed sensor / throtlle sensor . anyone point me in the right direction

My clio wont start, i have electrical fault code PO500 Speed sensor A. What is this and where in the sensor, would this cause the car not to start ? any advice would be great :approve:

It was fine last night. just been putting the plastic covers back on around steeing column and now i have this icon and the car wont start. also had the injector rail off last week but re-fitted and it started last week. any ideas people ?

Ive removed the original seats and installed bucket seats and fitted an omp steering wheel and removed the airbag from passenger dash. Is this why my service light is on or does this mean that i have a sensor fault somewhere else. The car had service light on when i purchased it and i have...

Debating which system to go for when i have some money spare. Mainly going to be using for track days in the summer. Not sure what the miltek system is like for the 172. was thinking of getting a tubular manifold of flea bay to go with it.

Anyone advise the easiest way to get the bonnet open on a clio 172. I have a broken bonnet cable which needs replacing and the bonnet is completely shut ! if i took the front bumper off would that give me access, would i have to remove the grill somehow ? thanks

I'm thinking of getting some refurb calipers for the front of my 172 as they have covered 84,000 miles and since i'm replacing everythink else and goingto be doing track days its probably going to be woth it. Wheres best to buy some from and what sort of price are we looking for the two ...

Does anyone know if the original renault bushes need drilling to fit the KW variant 2 rear suspension on 172 182 as they dont fit the KW shaft The shocks have two triangular rubber type pieces on the shaft along with a waher and nut, not sure if these are in place of the renault bushes or our...

Has anyone done this and advise how to do it ? Or does anyone know of any guides for this ? cheers mike

Anyone know any decent places for 172 insurance ? 27 years old 4 years no claims, Clean License.