Search results

What is required to remove this ? I think the canister has been chucked but the feed and connector is still there. can this just be fed out the bottom without the canister ?

On the right hand side of the fuel rail should there be anythink connected on the right hand side where the regulator is ? i don't remember anythink being connected on the r.h.s but my friend was asking I have been looking at pics of fuel rail and only see a connection on the left hand of...

Where can I get thes from foe the best price ? i recall a Renault branch on here ?

Anybody got a picture of the bolt which goes through the lower gearbox mount and into the gearbox assembly i need help trying to find the correct one in my box of bolts !

I'm just in the middle of finishing off my engine install can someone guide me ? think this is part of the gear linkage underneath ? cherers finch

Who's selling these the cheapest ? is it worth only changing one also and not the 2 ?

Can anybody identify where this goes ????? im thinking in could be part of the brown connector which I think Is the oil level possibly ? does this need soldering to this sensor as I'm unsure ? its a pinky peach colour...

Has anybody done this ? Im a big fan of rota grids but been told that they are a nightmare as i think the offset is ET 10 ???????????

I'm after the above ? Who sells these ? I think k-tec do one ? Anywhere else or any trader on here make them ? Also where can i get a new Lamda Sensor from ? Is it worth changing one as the other is just for monitoring ? cheers Finch

Im just in the middle of connecting up my wiring loom and i am struggling to connect up the the sensor on the bottom side of the gearbox. seems pretty tight on length ??? not sure if there is a particular route of the loom and is it tight on length ?

Anybody got any pics of which way the wiring looms runs and bolts where the upper gearbox mount bracket is and ecu connector . ive got all this side of the loom and can't remember which way the loom sits as there some plastic on the loom which must screw into somethink and not sure if the loom...

My clio 172 track car is running a 182 manifold and de-cat . Is it worth getting this mapped or getting a RS tuner ? Do they actually do anythink and improve performance ? Im just looking to squeeze abit more power without spending alot of money cheers Finch

I have fitted my clio 182 Manifold to my clio 172 , I have a scorpion system. I havent had a look underneath as of yet to see what i need to finish it off. Im assuming i need a custom de-cat pipe making up unless the 182 de-cat pipe will fit ? What have people done ? cheers Finch

Anybody know what the recommended Crank current is for the 172 and dimensions ? Anybody recommend where to purchase online ? I want to order one this afternoon cheers Mike

I'm in the middle of putting my Clio 172 back together . ive fitted the 182 manifold but I'm trying to fit some replacement pas pipes but I seem to be struggling to get one lined up as I'm not sure if something is fowling the pipe so I can't get on it at the right angle . im just thinking is...

I have purchased the Pure motorsport Air con delete kit. Is there anythink else i need to purchase or remove or blank off in order to use my car ? The air con system doesnt tap onto the stock radiator does it ?

My clio has been off the road for 2 years as ive done work on the car and unfortunately i was in an accident which prevented me from progressing on the car. Im back on it now and the Engine and gearbox are fitted in place. The oil was brand new but obviously im going to drain this as its been...

Whats the best method for painting my wishbones ? I take it i need to rough them up first ? Do i need to use some form of primer then afew coats of paint and laquer ? Im rubbish at painting so any advice would be great. Calipers i will use caliper paint and use that on the hubs ? thanks Mike

Ive managed to get some paint on the ABS sensors !!!!!!!! Anybody else done this ??? will they be ok if i clean it of with somethink ? any done this and what have they done ? I failed to remove them and ive read here there really hard to remove without breaking !

Anyone got a guide on how to remove everythink ? I want to get my front calipers powder coated so need to remove pistons and seals

I accidentaly bought one of these second hand 6 months ago thinking it was a Genuine renault 182 one for my clio 172 ! Has anybody fitted and used on of these stainless manifolds ? what do people think ? Has anyone had there car on the rolling road for comparison on the factory 182 manifold ...

Anybody have the part numbers and prices for these or who to see about getting them ? My Hubs are currently of the car and i would like to put some new bearings in before i do some track time. Also after a Bosch Lambda sensor

Any advice on how to remove the above 2 items and what so I need to do it ? i want to get my hubs powder coated so looking to remove these

How hard is this to remove , does it just unbolt or is it abit more complicated on these engines ? I just wanted to get it painted or powder coated

Ive just re-nstalled my engine last night on my own after it sitting in my garage for over a year ! Ive noticed that the engine sits on a angle ? the front of the engine sits higher than the back at a angle I assume this is correct as the lower engine mount is in position and the upper engine...

Any advice on people best methods for aligning up and bolting gearbox together ? Am I best using the engine crane to lift the box or would it better 2 of picking it up and aligning onto the shaft ? cheers finch

Where can i get some of these from ? Ive noticed one has a slit in it cheers

Anybody know roughly how much the above gaskets are ? Any other gaskets worth changing while i put the engine back in ? cheers Finch

Im going to repalce the track rod end , wishbone and ball joints ? Is everybody using genuine renault parts ? if so how much ? or is a motor factors equivalent ok ? cheers

Ive just removed both of these from the car and was going to send them to pirtek to be repaired. Im not sure if both are leaking or just the one pipe . i'd like both to be replaced then I know I shouldn't have any issues . I found a hole in one pipe but I've got a feeling the other was...