Search results

£72 on black circles for 195's, i got my set from them in 205s for £390ish fitted.

Clutch release bearing? Just realised you are in Ramsgate whereabouts? My ex misses lives there and i used to be there all the time ha.

Nice work, that Sabelt wheel should come up nice with a clean and a brush. I take it its alcantara?

Great thread and great car, i know Ktec have issues but they have built a great car there.

It does look really good, I will bring mine to yours and you can tidy it up for me ;) What's next?

Just went through this from a start, it has come a long way! Very tidy car mate you should be proud.

Looks fantastic, how you getting on with the PMS shifter? I'm thinking about ordering one myself.

I did have it removed only two screws can only see that it gives the ECU a bit of support.

Agree with Engine Dynamics i have had work done by them and it's going back for cams and mapping at the end of the month.

Hmm i don't think the 182 does as i think it takes it from the ABS i may be wrong.

Sounds like your having a right old mare with the car ATM, didn't really think the ABS pump failed on these.

If its a speed sensor it could be the VSS in the gearbox or the wiring to it. Do you get any other symptoms or issues?

Yup, going to call them tomorrow and see if i can push a bit more on the refund and get another jubilee clip. I really like the sound now, it gets alot of attention at times haha. Yer i have been pushing them and no traction issues not even in the rain, very happy with them. Also stopped at...

Spotted a few Clios around the big MK meet tonight, anyone from here?

Good to meet you the other day, car looks really tidy it would be a shame to strip it all out. What are the plans moving forward?

Cams and mapping next month :) Yer it was a good response from Ktec really, also you weren't lying the PS3's are great :) Yesterday I had the new tyres fitted while i was waiting i decided i will cut the intake pipe instead and save the hassle. It must of looked weird me in a hooded jumper...

Yours is one of the nicer ones i have seen! But yes i am an intake snob hahaha

The fatty is just a bit too rough and ready for me if you get what i mean. It does the same job and probably has similar performance etc. If i was going to go with anything else i would make my own like @Dr Jekyll

You are potentially right, however i can only trust them and send it back and see what happens. Worst case get a full refund go back to standard and forget it all.

Yer its the part that goes to the throttle body that they think is a problem and tbh so do i. Refund wise it would be £25 inc VAT so not a huge amount, but still something. If the pipe comes back a second time and I still have the issues i will either ask for a partial refund and modify or just...

I was just about to come on here and start slating Ktec as I hadn't heard from them. However my phone started ringing and i spoke to a nice lady called Isha, after checking out the pictures she thinks there is an issue with the pipe i have. I was offered a partial refund if i wanted to keep it...

Lol true it does give it the noise just touches everything and doesnt look the best when fitted if you know what i mean. I like it all to fit nice! I'm just impatient and lazy lol a bad combo haha. What are you mounts like? I have just had mine changed so can't imagine there would be much movement.

Love this car, great work as usual Mark keep the updates coming. Then when you finish yours i will give you mine to do haha

Tbh i dont see much point of the other jubilee clip with the bracket, doesn't really hold it up much and as we know its weak. I will wait until tomorrow and see what they say and then cut it at the weekend i guess. its 90% there just needs the final adjustment, i may even change the filter to a...

Coming from Uxbridge onto the M40 i spotted a blue 197 cup on a 56 plate, looked really clean. Around 10/11PM anyone from here?

Well i went into the car park after work and thought about what to do. I decided i would have another go at fitting, although it was dark i didn't have a time limit and had an LED light with my tools. I loosened it all up and managed to get it fitting a lot better on the throttle body, but i had...

Thanks for taking the time to come back to me, i think i have a dodgy pipe to me that bend is far too severe and the pipe ends up getting crushed and bent when fitted, almost back on itself. With regards to fitment on the throttle body i have to man handle it with two hands to get it to sit...

Hmm not very happy with that. The price you pay for one of their systems you expect it to fit out the box no issues. I don't appreciate having to cut or modify the pipe to get it to fit. The whole reason why i bought the KTR kit was to make my life easier. I will wait and see what they come back...

Cheers Mark, means a lot. @182_steve @Louis' I have received my induction kit today and the fitment is shocking. I was rushing to try and fit it in my lunch break, but im going to have to remove it and try again at the weekend. The piece of pipe that joins to the throttle seems way too long...

It was a very good decision, I am very happy with it. I would love to see that 106 on the track must be a beast! I used the @Dr Jekyll method with a bucket of warm water, some Vanish Gold and washing up liquid. Pull the belt out as far as it will go and use a washing peg or a clamp etc to hold...