Search results

Lower gearbox support aka the dogbone mount?

Yeah, Wet Coat is brilliant.

As well as claying i'd suggest an iron fallout remover and also a tar remover. You might not see it on black, but it'll be there. I quite like the Gyeon stuff myself, but it's all similar really.

This is primed.

Prime the pad properly, which means not just 3-4 blobs of polish. You need to have a thin even coverage of polish over the entire pad. Once it's primed, then you only need 3-4 blobs of polish per panel area.

Are you sure that's all true. Surely if you have bucket seat with harnesses then you don't require airbags and if they are not there then they can't be tested.

I've had various parts off them, not engines though. I'd recommend a cambelt change at least if you do go for a used engine though and probably a compression test to be on the safe side.

Could possibly be the fuel pump on its way out, but it's not that common really.

I would have guessed injectors from what you've said, but you've replaced them. Brand new ones were they?

Be cheaper if it was the sump though 😂

This is where i got my clamps from. https://www.ebay.co.uk/itm/271326260811

Well the rear to centre section you can use a Mikalor clamp like i did and for the manifold to cat you need the genuine renault fitting kit...

Which bit is it blowing from, centre section? I used a Mikalor clamp on mine. 63-68mm

Torque is mega on that graph! I'd expect it to be another 20-30bhp on top of that now the boost leak is fixed.

The little black connector? It has a little clip on the end closest to the alternator body, needs lifting up.

Guaranteed to be leaking from either the rocker cover or the sump.

Did they clean the discs when they put them on? HC's comes with a coating of light oil to stop them rusting in storage, this will contaminate the pads if left on. The pads may not be bedded in quite right too. Glazed pads can cause squeaking.

Bloody hell :openmouth:

I'm guessing the meter will have AC and DC settings. If so, make sure it's on DC (the straight line symbol not the wavey one). Edit: Actually, are speakers AC?

What colour are the wires?

Did it unlock ok and try to crank over?

Sup with it you reckon?

Just a generic cover that mechanics put over wings when working in the engine bay. Car need metal wings for the this though, and as it's Snap-On it'll be American based so their cars tend to be all steel panels.

Yeah the SERV light always comes on with another light apart from the rain/light sensor on the windscreen if that's unplugged it will just bring the SERV light on, as someone on here discovered recently.

Should be in TIDL, but as it's CSF related i'll post it here. Cocked up and booked BTCC at Knockhill for the Sunday, so i'll have to leave Saturday night 😞 At least i'll get the track time in and i'll probably stay for the evening food too.

I'll have to have a look at it.

s**t! I've just realised i've booked CSF on the same weekend as BTCC Knockhill 🙈

SantaPod - Festival of Power - Easter Weekend Time Attack - Cadwell Park - Sunday 6th May SantaPod - Doorslammers Event - 19th or 20th May SantaPod - Main Event - 25th-28th May BTCC - Oulton Park - Sunday 10th June TimeAttack - Oulton Park - Saturday 28th July BTCC - Knockhill - Sunday 26th...

My SERV and Airbag light come on now and again if i go over bumps. I have standard seats but aftermarket steering wheel (with resistors). Could i use your method to stop the light coming on?

That voltage is correct. Try the earth's.