Search results

Did you just change it for a cheap pattern part?

When I stripped the car out years ago I removed the interior lights. As the plug is still there I just thought it would be nice to have a bit of light when I open the boot now as my eyes are getting worse 😂 I got a couple of LED units as I have no idea where the original light is now and just...

Yeah spring rates are 525lb front springs and 400lb rears. Whiteline ARB, PMS strut brace, strengthened wishbones with powerflex black bushes, car with me is approximately 1100kg

Currently on Gaz golds Tbh I have not had loads of wear to the inside edge due to driving on the road

What do people recommend for track use but also driving to the track and limited road miles. It’s been a while since I had the alignment done and these were my settings. Camber was pretty much maxed out with camber bolts.

@Advikaz I got a new one from Renault just over £8

I’m planning on refitting the flywheel and new clutch the weekend what do people use to lock the flywheel so the bolts can be torqued up Something like this...

Got a link to the boot?

Thanks That makes sense I’ll leave mine alone then

Right as I have my engine out I have decided to change the clutch cable as it is easier to get to. I’ve got a Febi 172058 cable as it was massively cheaper than Renault. Just looking at the one in my 182 it looks different to the Febi but the Febi looks the same as the Renault ones advertised...

I have a normal clicky torque wrench "cheap version" that does 220Nm but need one that does 275 Nm for the hub nuts. Seen this Sealey STW310 which also does angles, it is more than I wanted to pay but nice to have angle feature as well. Has anyone used one or any other suggestions for not...

I’ve currently got my engine in bits and noticed a bit of damage on the crank pulley and casting so it got me looking I got lucky so will probably be buying this

Anyone fitted the protection plate PMS make? https://www.pure-motorsport.co.uk/lower-cambelt-protection-cover.html

As Renault have decided to not supply this part now for cam belt changes what pin do people use now? Or if anyone has a genuine pin could you measure the pin and put the sizes up please Thanks

I have a facelift trophy EDC currently on 45k miles the suspension is fine for daily driving, the screen is much nicer than the pre facelift and it also has physical buttons for the heater controls. I didn’t bother with recaros as it was standard with the alcantara heated seats (which are...

I will probably just stick with the brembos I know are good never really had any issues with them over the years

Has anyone used the Eicher brake discs on track from Euros They look very similar to the brembos that Kam sell I normally use Brembo HC with RC6 pads but seen these wonder if they are worth a try

This is after one week I have never known a car get as dirty the the Megane it just attracts the crap

It’s a 172 with ac so 110v one

A few weeks ago I seen a post with part numbers and options of which alternator will fit from Euro and GSF but can't find it now, if anyone can link to it that would be good(y)

I hadn’t been to Oulton for over 6 years so was taking it steady while it was wet, there were a few slippy spots 😂

Lighter wheels and brake discs to reduce the unsprung mass will have a bigger improvement than other bits

it’s all going to come down to budget people who can afford AST will say all others that are cheaper are s**t which in comparison they probably are but it would work the same if someone was running pro flex they could say AST are s**t. I’ve had Gaz golds on for years now with custom spring...

My current mileage, I’ve had the car about 10 years now. I don’t know why everyone seems to think a track car should be knackered.

If you have a google its a common thing but never read about a failure

I have 3 sets 🤦‍♂️ 888R’s for dry and Federal RSR and rainsports for the wet days. I have had the rainsports about 3 or 4 years now but not used them on track. The RSR is a decent tyre as it copes with rain surprisingly well, it is not as grippy as a “normal” road tyre would be but in changing...

Make your own, I used a old set of plates covered them in carbon vinyl then put a sticker on

After 5 days

Washed the car 3 times this week, this was after 2 days

I’m about 10miles from Birmingham so my local is Donington or Mallory (but never done it). Donington is one of my favourite tracks along with Oulton