Search results

Just buy one of these and go to a powerflow or custom exhaust place and ask them to fit it. With Probably wouldn’t cost you much more than a couple hundred pounds all in...

Just put a coat of gtechniq G1 on you will not need wipers most of the time then

Yes take it out the boot, my car was stripped so made it a bit easier but fold the seats down and it should come out easy

I left the old stuff on but there was nothing wrong it it, it’s been on for about 5 years now

Not at all, once you have removed it and it’s on the floor the alcantara just just formed to the shape no stretching needed.

Do it yourself it's not that difficult, and if it is sagging noting to lose by trying anyway. I retrimmed mine in faux alcantara cost about £25 - £30 a couple of cans of spray adhesive and the material.

I sold my focus RS last year and the A35 and Megane Trophy were the only cars on my list. The Merc is a stunning car drives really nice and interior wise personally I don’t think anything is as nice but you do have to spec the premium pack or premium plus and then it becomes very expensive. As...

So it is a very similar price to PPF It is a Megane trophy so has wide arch’s that may pick up some stone chips. My Focus RS had some rash on the bottom of the bumper from 40k miles of motorway work.

Yes brand new car been looking at Xpel so not cheap stuff It would be done at a reputable company

I am thinking of having PPF applied to my new car when it arrives as I do a lot of motorway miles. Is it really worth over £1200 for the front of the car and wings to be covered?

I've been using a sealey 2.5t jack for the last 7 years and not had a problem, being aluminium and steel its a bit lighter but still heavy Sealey RJAS2500 2.5tonne Low Entry Aluminium Trolley Jack Rocket Lift/Lifting | PrimeTools

The filter just fits on the end as normal

yes have a stat plate and a sender plate like this I can try and find the part number if you want? https://www.merlinmotorsport.co.uk/p/mocal-billet-sandwich-plate-for-sender-fitment-m-tgasp200x

I used aluminium revotec ducts on the outside and some bass ports in the arch to hold the ducting hose wished someone would replicate the cup racer ducts out of fibreglass or plastic.

I have melted and lost a few on track, don't bother with them now.

I did write them all down but not sure I will be able to find it.

yes I used Mikalor on all hoses and did a trackday atAnglesey, one pipe started leaking when on track as they were not clamping the hose correctly messed my day up so changed all the clamps when I got back to normal jubilee clips.

as cub said it makes the gear change more direct and feels loads better than the standard sloppy change. The only downside is they rattle and it can get a bit annoying on a motorway.

Save some money and get a PMS gear linkage

Looks really nice, bet the reflection is bad though?

this is mine did it a few years ago now saved me finding the photo. Pure do a kit with the tapered section as well

Just send a message to somebody on ebay with a image of what you want, that's all I do if i want something I can not find https://www.ebay.co.uk/itm/2-x-RENAULT-Sport-clio-cup-megane-Decal-Stickers/174344217461?hash=item2897b9a375:g:boUAAOSw5dNWm5a-

best way to do it yourself I have done a couple of different designs. Old ones new ones

they look hydrodipped

I have sat in a few cobra Monaco’s and found them really uncomfortable, I ended up with Bimarco Futuras, they are lightweight and comfortable, you definitely need to go and try some seats before you buy. The Jon Foz frames are good...

I have been using dodo juice panel pots for years now enough to do a car twice and only about £5. Always seem to get decent results with it.

If you are struggling with the welder but some EZ outs and don’t forget to get a tap and tap the hole out again so it is a clean thread when you put the new bolt in

I have Gaz golds and really pleased with them for the price I paid, went with custom spring rates if 525lb front and 400lb rears I have to drive it on the road to and from the track and they are loads better than cooksports with cup shocks I had before. Got mine from @Mash. not sure if he still...

As the title

Bolt is not just “bolt in” you need to weld the feet in on most if not all bolt in cages