Search results

More coming :)

You would be looking at 450 ish Alan

Yes it is a waste of money but one eye is on a super charge conversion next year and was a good ish price . Alan

Its only a small drop of 18 mm and 14 mm so nothing much . The Brembo are very good with the DS2500 but there was a good offer on the BBK so thought sod it . It will be 356mm front 8 pot 356mm rear 6 pot Alan

O god yes :) Its nearly done but some big bills in the form of Clutch , manifolds , tyres , and 8 pot and 6 pot brakes still to come . Alan

At the weekend I got round to upgrading the suspension at last . Parts arrived from the USA . Tein springs and Tokico shocks Old shock and spring out ( this set up has done 91K miles so a bit tired ) New Blue Tokico shock Old vs new shock Old vs new spring Old vs new...

Few more bits done at the weekend . Motordyne copper Iso Thermal upgrade with Aramid gasket and Copper Throttle Body Heater Removed the pelnum Removed the old pressed steel gasket ( next to the Aramid gasket ) Few mill thicker All in place Then throttle body removed New...

Got another job done at the weekend . Got my Ultra Racing front under brace in the post . Out an ready to fit . Installed Bolts were a pain to remove but installed well with a nice fit . Alan

Got a engine torque damper delivered form the USA on Friday Fitting was ok but space was tight . All in with earth bracket connected . There is slightly more noise / vibration in the cabin but nothing that you can feel to much . Throttle response feels a little more quicker more so in...

Sound clip of exhaust Another small update as some more parts arrived . Earthing kit to add to the smaller kit that is installed . Then wrapping the induction pipe in DEI heat tape ( did this on my old Mr2 Turbo and inlet temps came down ) And to finish off a wax with the G3

Easy to get the cash back sold as seen and all that ??? Alan

Do you need to be a member for Goodwood ? Any spaces left ? Alan

Do you get the push start button on the LE ? Alan

R32 for me got to love the sound . Alan

Had a busy long weekend and got a few more bits done . On Friday i went up to Abbey Motorsport for a Milltek Exhaust to be fitted and check the tune on the dyno for the uprev . Old stock system The back box pipe had been patched up one already . New Milltek fitted Then the Dyno...

That the one LOL

About 220 BHP and 220 LB/FT Remap will be around 260 BHP - 255 LB/FT Alan

I had two a 20V turbo in BRG And a plus in Ink Black Nice car but not cheep to keep on the road . Alan

Got a few more bits done over the Easter weekend . Seafoam was done below x 1 can in fuel tank x 3/4 in oil ( run for 100 miles ) x 1/4 in brake booster pipe Then to drain the oil and seafoam out and do a fresh oil and filter change I changed my rad cap from the OEM 0.9 bar one To a...

Some more bits arrived today .

If I wave enough pound notes at you I bet you would re think :)

For sale yet ?

You crazy mad fool :) I check the oil on the dip stick every week on any car I have had . Alan

Boot was still a bit sticky so put some plastic washers in the boot spring to fix this and make the boot pop up more .

A few more updates over the weekend I got done . Fist up was to clean then condition the leather seats . Then was the boot counter weight removal ( boot does not pop up all the time due to this weight ) Then last up was to re adjust the aux and air con belts as there was a little...

Not many updates just a quick clean and wax . Next up will be the exhaust suspension and tyres . Alan

Proper engine :)

Ok so after putting a few miles and bedding the brakes in I can report on the set up . The old brakes were not in the best of shape so any change would be an improvement . First up is the pedal feel with the new S/S lines the travel so much shorter and the feel so much firmer and all of the dead...

So this weekend was the brake upgrade / change . Fist up was to remove the front discs and pads . Front disc not in good shape Or the pads Then to fit the new front disc and pads Then the front S/S brake lines Then on to the rears with old disc and pads removed...

Got the chance to use my G3 wax today after it stopped raining