Search results

ill rephrase my question to stop confusion, should i paint and fit them or sell them?! lol i wont fit them in primer, far too southend seafront :)

have had these skirst for ages, and never got round to painting them or fitting them, now im not even sure about the look, with?? or without?? ps im aware that it needs new rims and back bumper to be painted so lets stay on topic yeh?? :rasp:

mine did, had big sound system, no rear seats and no rear seatbelts so they didnt even check. now ive put the seats back in but not the seat belts lol, just gna take them out again for the mot,

Re: Not really from the beginning but my project looks nice, not a big fan of the wheels tho,

get fogs too, perhaps zenon headlamps if you willing to spend the wonga

loose the idea of tints, they look awful unless you get all the windows done, then they still look chavy as s**t, id say, deck it!!! 60mm (im selling some 60mm back springs if you interested) colour code the side strips, rs back bumper, rs grill, new side indicators (black or silver) and...

me and my mate had them, he got pulled about twice then got a VDN so took them off, i got pulled over constantly and told to take them off, so i swapped em for ph2 lights, and the girl i gave them too has been pulled about 3 times in 2months. either way i think they look w**k now,

my jbl 75.4 foes this, good smack and it comes back to life!!! in all serious, have you checked all the conections, at the amp while its turned on?? if its over heating, itll cut out and come back, might just be knackered, are you loading the amp properly?? is it going into protect mode?

how hard is hard, sounds to me like you anchoring it and the abs is kicking in, if so i think that might be a fail thread right here

does it have to be a fli sub?? and its depends 100% on the size and shape of the box (more so than the size of the sub) doe you mean, is there anyway to fit a prefab 1cuft sealed box in the boot of a clio with a strut brace??

^^ bet that hums abit, i had a similar sub (RE XXXv3 15") in a slightly smaller box, thinking about it now, im incredibly lucky i didnt crash because i used the weight of it to keep it in place :S

looking nice, much the same mods as me :P same colour, same induction kit, and some colour coding, get ph2 rear lights rather than tinting yours, faaaaar to much police attention seeing as its illegal, and if someone smart goes into the back of you, they can make it your fault on the grounds...

what you doing with the turbines?? got a long time before youll need winter wheels again :) pm me if you sell them. looks good, very different. love the front bumper

the lights confused me, looks like you have an fk one on one side, and a standard one of the other, but then another of the fks on both side, confusing

i wont think ill be doing any over clocking since i dont even know what that is, probs get 2x1gb sticks for a while and up to 2 more when i get some more money

i did, im guessing i need need DDR pc3200 memory, but if i put 4 gig in, will i see it all? or would i just be pissing money away?? it says maximum of 1gb per slot, so should i settle for 2gig on dual channel memory, or 3? or even 4??

i think i have a harddrive with 8mb cache, honestly not that sure tho, its an excelstor j880s ata mother board is asrock p4V88+

what is mobo?? mother board? if so then ill update you the next time my computer breaks and i have to open it, all i know is that its by asrock, is there anyway of finding out without the instructions or box? also os is vista home premium 32bit

I have an old pc with a p4 3.0Ghz single core processor, (probs very out of date and s**t now) basically it supports dual channel ram, but only has a single stick of 512mb in it atm, but it has 4 slots, 2 blue and 2 black. can anyone tell me how ram i can stuff in her to make her abit...

basically, i lost my music collection and have been robbing up everyone elses, i have a fair amount of it back, bt since it was up loaded by their itunes from cds, its all saved as 'm4a' however i dont like itunes, and want to use windows media player, but it doesnt like that file extension...

ive taken mine out, i think i know what your on about, but ive had mine like that for a a coupla months, and the springs are staying nice and in place

what phase?? if your talking about ph1, stump up £10 and go on the guides section because its all in there

also, if you want a big one, just get smaller wipe blades :) still legal, but i will say it wont be appreciated on cliosport a great deal lol

might be worth investing in a tub of elbow greece if theyre anything like mine, tint came off easy, but the glue is an absolute b**ch, sergcal spirit helps.

basically, one with out the other would only bring limited benifits, however if the amp in youer headunit is up to scratch, id suggest looking into the speakers first, then an amp if it is running into a clip at your ideal volume. id look into other peoples systems, as the oem speakers are...

some people need a slap, and the mirrors aswell

surely lower profile tyres would leave the drive shafts at the same angle, the centre of the wheel stays the same point in relevance the to the car, so wouldnt put any extra stress on driveshaft basically, no excuse, them low pro on there, that looks seriously sex man, if you ever want rid of...

check the voltage of you battery and alternator, could be a knackered battery, they do all sorts of funny things when theyre on theyre way out.

i dont understand this, your claiming it does the same as the throttle body, if this was the case, why not just have a bigger throttle body, the acoustic valve deadens some engine noise, my first guess would be that it uses the air/preasure in the inlet manifold to create a similar note to...

is there any ways of changing/modding this to stop my car being rear biased the whole time?? (its lowered aprox 90mm)