Search results

you need to upload to Photobucket first and then directly link to them on Photobucket , we need pictures :)

i have just bought some AG Shampoo on the 3for2 at Halfrauds, I am a detailing newbie however :)

i have also used the megs clay kit, there is a section on polished bliss about claying, have a little read of that for more claying info. any clay should do the job as long as you keep it lubricated :)

really nice, is the black hole primarily for dark based cars or could i use something like that on my cup?

since buying my Dremel to cut my stubborn exhaust bolts i seem to be using it for many different things :-) Question is can i use it for headlight correction to save on having to do it all by hand, if so can anyone point me in the direction of the attachment needed (there is polish in the box...

people normally remove the side one, i did for a while but then realised it sounded broke and so reconnected it back

triple r is pretty cheap, 25 for 5 litres

might be worth the change as triple r with bosch filter can be had for 32 delivered from ECP

i had a look at these but for 35 they can keep them, cable ties will do the trick for the time being !

i have hadaftermarket exhaust that have got louder as they get all coked up

it might be low but not enough to worry about and start replacing parts unless its something cheap like a service or thermostat

i got a pattern part center section and backbox for 130 from my local parts place .. however it also hits the rear beam but thats mount related

have a check in your handbook it should tell you what needs changing and when IIRC , if not i have seen it on here somewhere

alrite dave, i am from accy, i used northwest performance for my belts and dephaser , any questions just ask

i would guess at injectors

v6 airbox is about £60 i believe - you can get them from Wests Renault on here. depends what you are after, if its noise you like then only an open cone can give you that, if your not fussed about noise you can revert to standard with a panel filter. A V6 box is somewhere in between noise wise...

looking well with those wheels

v6 airbox is about £60 i believe - you can get them from Wests Renault on here. depends what you are after, if its noise you like then only an open cone can give you that, if your not fussed about noise you can revert to standard with a panel filter. A V6 box is somewhere in between noise...

the lack of aircon, xenons and leather doesn't bother me go the slightest , neither does the abs..i got mine because it was in the right place at the right time ..... i am pretty glad i did to be honest, however they are both still a 172

Out of interest what sort of cost is it for carbon wrapping? Is it cheaper than buying + spraying a second hand bonnet?

what is your mpg trip saying? i get 35+ from my cup

jack it up and give your wheels a spin when off the ground this should tell you if its the brakes, sounds more to me like a suspension issue

I put the Carlub Dot4 in mine, however i didnt have an eazi bleed thingy so it was a case of - open bleed screw, mate pumps pedal down, close bleed nipple and repeat for all 4 wheels and it takes ages to bleed 1ltr through the system!

i have the EBC variant on my cup and cant fault them for the price (£18 egay)....combined with the brembo HC's & fluid change these are IMHO a better set up than standard for not much money (£65 for discs & pads)

they are rodding you off - go and take your money elsewhere

what car do you have JD? cant work it out from the pics

looking good, nice to see a mk1 alive and kicking, all the way from south america :)

looks like new, impressive !

what about stainless steel cable ties? no special tool needed

i haven't driven a ph1 however my cup gives me plenty of smiles even if it doesn't have the toys , 35+ mpg all day long too