Search results

just take the original to Pirtek and get them to make a replacement, as long as its roughly the same length you can just run it on a similar route to the original. I seen one recently on a mk1 kangoo where someone had a pirtek hose and it was just ran over the top of the engine and then down to...

I cant remember who it was that posted the cheap USPRO long aviation spanners in here, I ordered a set and have sat on them for about 6 months never needing to use them. Doing a timing belt this weekend, wanted to get a ratchet spanner on a nut, couldn't get enough purchase on it to crack it...

to be fair once the coolant residue was cleaned off the block is all the same at the front side, its been sitting leaking for a couple of weeks as ive not had time to get near it which is why all the dried in coolant residue is around the sump etc.

one thing I will say, its unrelated to laid up cover and more for normal cover but I found a company that let me mirror my NCB, so I done that, and then at the end of the year they send me proof of NCB for my full entitlement so I got a renewal from both companies with full NCB. - Not sure if...

I gave it a full service, the oil filter was SOLID, I couldn't budge it, had my massive water pump pliers on it and they slipped and caught the outlet pipe from the water pump and now I had a coolant leak, of course to get any access to see what was wrong it was the front end, alternator and...

needs the front bumper painted, the rear bumper painted and of course a wheel refurb (more on that later) Interior was in good nick just needing a good clean! the heat wave hit so idea for a good shampoo and wet vac! Brought the seats up much better white bits on the seats got a pressure...

Bought this a few months ago with the intention of building a Meglio - It was an excellent base, FF with Cup pack, straight shell, bodywork and wheels in need of TLC and service history lost! But then I left my last job so decided to tidy it up and shift it on and free up the cash, so that's...

I thought I was the only autistic trophy owner, This is why I had to sell mine :ROFLMAO: Good work!

as above yeah you can just remove it, remember you will need to get someone with an ac machine to remove any left over gas that's pressurising the system if there's any left, because it would be REALLY REALLY irresponsible to remember to wear gloves and remove the cap over the valve and use a...

When one Clio van just isn't enough, pulled a full van conversion kit out a van at the scrappies today to convert this to a van......

DCI 100 injector time............

good work, always wanted to try doing something like that, got a feeling ill get carried away lol

behave yourself, I've got this with your name all over it haha

I recognise that steering wheel, sure it's been on here at some point!

McDonalds drive thru (fat c**t)

strange question, were you in Stirling today? I seen a Blue 12 plate and didn't put 2 and 2 together!

Maybe an age thing for me but I hate the noise induction kits make on modern turbo cars!

to be honest I cant really remember! it certainly wasn't any worse, something tells me it got a little better when you drove it normal

my mapped dci80 had done from memory over 150k and was spot on! I piled hard miles on it for 3 years

Fantastic! - love the sill protectors!

best thing for them imo....:sneaky:

its the same base engine but the internals are different, compression is different, given how cheap a TCE engine is, its much cheaper to just replace the engine than convert yours to TCE spec

To be fair, Renault turbo charged it! - Same engien! once it was ruinning 150hp my twingo went like stink haha (57) twingotce150 - YouTube

ahhh the good old days! to be 18 again lol

The 172 cup seats were specific to the cup, you could get a set of non RS seats from a dynamique that are a similar design but have different pattern on them, or fit RS seats, as they are all a straight swap and interchangeable but obviously its not "original" if that's what your going for. 172...

Give me a merk three any day of the week! EDIT: Says the guy with 3x mk2's on the drive.

yeah single cam 16v

nope no dephaser, just a little single cam non VVT engine. Stick up a video

Halfords Advanced Offset Ring Spanner | Halfords UK £2 online for a 15x16mm ring spanner!

Halfords have a new tool range coming in so are clearing off the old range of odd size sockets and spanners that you never use haha Couldn't help myself, £14 In all stores and you get trade discount on top. There's also a 33mm on clearance but my local store was sold out lol Never know when...