Search results

You and Dan playing hide the bread roll eh?

More ketchup for the burgers at lunch

Glad you're okay mate! Look forward to updates as always.

Neither is mark 🥵

They were doing fronts with a free set of rears a while back. Think it was about £120. Now for the rear pads alone it's about £70 which I refused to pay 😂 Standard brembo rears have felt identical so far and I've still got air in my brakes.

Proplates do them, I got some gel plates for my brother at Christmas and they were great quality

I've a Sun Joe tyre inflator and its fantastic! Cant count how many times it pumped up tyres before dying. I even used it to press out the pistons from my brembos 😂 Think I got it for christmas 2019 and its had 1 charge.

Delay due to rust or just slow bodyshop?

Mines fine on ps5 HTH

Just loop the vac round from front to back of engine (acoustic to carbon canister)

Got our first ever win in quads yesterday. That white thermal p90 is epic.

Bled the caliper up and seems OK. I'll know if theres any air in the calipers when I go for a drive. Did the osr caliper too, the bleed nipple was all gummed up so rectified that! Next was cleaning up the rear arches. I've put this job off as it's just a messy one! Scrubbed up with some...

This is the guy who makes them.

Still looked leak free this morning but a used caliper I bought arrived and it was in much better condition. So being a pussy I decided to swap it as I dont want my brakes failing. Sliders lubed up, pistons removed cleaned and relubed then fitted. Peace of mind etc.

Just been out and the caliper appears to be leak free! I'll go for a drive tomorrow and then double check again.

You've not seen @leeds2592 recently mate

Just the P61032 mate.

After discovering the above issue, the clio was off the road for the week whilst waiting for parts to arrive. In the meantime I cleaned up the carriers to bare metal and painted them anthracite. Genuine rear discs and brembo pads arrived from @Kev@KAM. Went for brembo rears this time over...

i've emailed Kev. Knew I should have got a rebuild kit with my discs! Nightmareeeee

Is the main seal the one around the piston? Ik struggling to find any for 50/corner, especially at short notice! Might have to wince and pay ecp prices. Just dont want the whole system to leak dry!

I schlurped it up and it didnt taste like it

Potentially flipped the seal in the rear caliper? Realised I forgot to remove the cap when winding in the pistons so potential school boy error??

Well thats not true 😂

Just fitted a set of new genuine discs and brembo pads. All went okay, or so I thought. I'd forgotten to fully torque the caliper to the hub so went back out to click them on the torque wrench and noticed fluid on the nearside wheel... Appears its leaked by the piston boot and dripped down. Is...

You need to disconnect it. I found it easy to undo iirc so I cant help unfortunately! Just persevere.

My PMS shifter does have a weird gate. 3rd is more forward angled right, then 4th is back and angle right.

Someone can buy mine for £600 👀 I've managed to buy 2 now, gave one to my mate.

Throttle bodies and headlight adjusters tend to make a high pitch noise on 182s. Anything same on the dci?

Should have bought campus ones 😂 already flat!

Noticed a slight knocking noise on wednesday that eventually got worse towards the end of the week. Mainly when driving slowly, disappearing when going faster. Thatll be it then. 🙃