Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
There are 2 cup pack options . One with the anthracite wheels and cup suspension and one with the slightly different rear spoiler and front splitter . The anthracite and silver wheels are the same wheels , same fitment etc but obvously different colours .
Like peperami says . Use the stalk , thumbwheel to change the numbers then press the validation button under the stalk until it beeps , then it's set .
Is it standard ? You could be looking at anywhere between 170 - 180 , maybe even a little less like Ben_p says .Seems like the power varies alot from car to car .
If the filter is choking your engine you'll definitely lose power . I had a k+n apollo which did this . I now have a k+n cone filter in a custom made enclosure , the filter itself has a larger surface area than the original panel filter . Definitely pulls as hard if not harder than the oem filter .
If you get wax on any black plastic trim its a sod to get off and over time goes white . All the black trim products you see mask the white wax marks rather than remove it . To really remove any wax you need a solvent like turps . I use new look trim gel from carwashnwax.com , autoglym bumper...
I tend to buy alot of stuff from here :
http://www.chemicalguysuk.com/
He's a cliosport member R9DCG aka David Graham . Usually delivers within 48 hours plus you get 10% discount as well iirc :)
You definitely need some form of lube , i.e. shampoo or the clay will mark your paintwork
Leave your car wet after you wash it , and use a weak mix of shampoo and water in a spray bottle instead of the clay lube .
You want plush microfibres for removing polish and wax , a waffle weave towel for drying your car .
For polishing i prefer the german applicators , they give more...
Like rich says Flux will be any quote , obviously it has to be the same terms . I've just renewed with them again , had a cheaper quote from churchill so they beat it , no proof required as well this time .
Steer clear of the k+n apollos . I had one on my 182 , it choked the engine so i ebayed it . That was after the engine stopped and the AA had to tow me home .
Like Pettsi says , Nero . Sounds like your trying to burn the songs as audio rather than mp3 .
You need to burn them as data ( iso ) On a 700mb cd you should easily fit on 200 songs .
My Michelin PE2's lasted 8k on the front , put the new ones on the back and old ones moved to the front so i expect around 12 - 13k out the the set on the front ( fingers crossed) contis on my old 172 lasted 7.5k on the front
Plumbers merchants , Arctic spray .
http://www.plumbworld.co.uk/0000-3509?eid=0023-000001
Like lei69gh said . If the panel is accessible from behind .Try a seam roller . I used one years ago and removed 2 dents from a rear quarter panel ...
^^^ Yeah and loads of people waiting to bid i would imagine . Most people only bid in the last few minutes of an auction anyway . Plus they have 55 negatives in the past month :eek:
Your on about reverse osmosis water . We have a Reverse Osmosis unit at work . It basically purifies the water and removes all the chemicals added at the water treatment plant that can leave water spots on your car if you leave the water to dwell on the paintwork . But they are usually used on...
I wear jeans all the time and keep my wallet in my back left hand pocket , when i bought a new wallet it was alot thicker than my old one plus with my keys in the same pocket seemed to cause alot of bobbling . Since i bought my 182 i alway put my wallet in the centre console , hopefully this...