Search results

Now you mention it, I'm pretty sure that James said something about a tilton being the only available/suitable bias valve other than what was run on the cup racers of course.

So when you say standard Renault map are we talking original ecu?

Who mapped it out of interest??

If your on a cup you need everything in that list except the alternator. You remove your p/steering pump and lines, the original column and the rack if your fitting a dci item. Then it's a case of fit the column, control box fitting and wiring in and rack assuming that's the option you choose...

I'm not to sure that the generic bias valves lower the brake pressure enough tbh. I'm pretty sure James looked into it.

No is the simple answer. If you bypass it you'll end up with full braking effort going to the rear. The compensator valve is set to a preset value to stop this happening.

If the TL4 box is anything like the JC5 it will only wear out the dog teeth on the gear (the expensive bit to replace) rather than wearing out the softer synchro ring teeth.

It'll rev even higher with a 197 box fitted mate.

To remove the tar strips you need a hot air gun and a scraper. After that you need thinners to remove the residue. When you say removed everything, are we talking standard seats as well and replaced with bucket seats? After that your into fibreglass panels, but they're not massively cheap in...

It looks huge because what you can see in the picture is the body of the damper mate. They're actually inverted in the casing on the sportline 2's/5100. It's to reduce the flex to the bare minimum. Don't be fooled by the bullshit Martin! Lol!

Try this guy chip. Here's a thread: http://www.cliosport.net/forum/showthread.php?749214-Calling-all-wiring-experts-Help-needed Grats

I just bought the stiff shift mate, so it's whatever comes in that kit. I can't remember now as it was bought and fitted a few years ago now. Yanoo will be able to confirm what comes in the kit.

Sounds like a plan then mate. I've already got the Yanoo kit in the cup and really rate it tbh. I'm not sure that I'd swap to the pure shifter unless it really did feel substantially different/better

Add a Yanoo kit to the scenic one though and your moving in the right direction.

Yeah I can see what your saying mate. I'm quite fast moving my hands about due to my superhuman wanking abilities. Lol

Yeah it's working mate. I'll have to have a feel of yours (ooh er!) and see what I think to it. I don't dislike the original setup tbh.

Lol! Thanks!

Yeah you'd be surprised at just how much weight removal on these cars does make mate. I've upset a fair amount of exotica in what's essentially a stripped out cup.

If you want a gripper let me know. I can get hold of them at very good prices.

I'd say it's more important to keep the weight as low as possible. Sometimes you don't have much choice in terms of adding heavy items as they're a necessity. Unless you go full motorsport spec and source lightweight items of course, but that just adds time and ££££££'a to the job. Good of to...

No it won't effect geometry mate, but fitting new rear beam bushes is a good idea. I'm yet to see a set that are knackered tbh, but uprating them is always worth doing for less compliant items. Regards the solid rear top bushes, I'd say they possibly make the damper do around 2-5% more of the...

Not really mate, but it removes any compliance that you might get from the standard bushes. I was in a position where I could have some sets made up, so I did.

Hi mate! It's not going to be for a couple of weeks/a month before I can get the engine to my new house for stripping as it's currently residing 65 miles away from where I currently live. If you can hold out a while you can have the brackets. Great news about the v2's as well. Pleased that...

Yeah I'll try and get some pics uploaded of it for you mate.

2 reasons really mate. 1) cost! So f**king expensive to buy new and rare to see them come up secondhand. 2) not enough ponys to pull the skin off a rice pudding! Lol! This is all set to change though. ;)

This was why I had some custom made nylon rear bushes made for me and BIGASH. I didn't have any originals and needed some asap. I've got 2 originals you can have Martin.

No mate, no lsd. :)

I've been going for the past 10+ years now mate so the only things I have to get used to is when they've resurfaced some of the track. Everything else remains the same. 8:15 on a TF day will be an interesting proposition as well. That's when luck really does need to be on your side, but that's...

Shame that. Always interested to see how much effort other drivers put in around the ring. Need to get back there myself and get the 8:15 in the bag. It'll happen. I guarantee it. :)

Any from in your car mate?