Search results

Emissions, limit was .2 was about 9.3 seems to be running rich as anything since replacing the injectors, may need to be mapped again

Well seeing as the Clio failed spectacularly on emissions today ill be down in the derv :)

That is good for me :)

That's fine by me :)

I'm still game for this :)

Mot is booked a few hours before so hopefully all goes well :)

1. Leep86 2. Andy (Leep86 friend) 3. Jaswalker24 4. 5. 6. 7. 8. 9. 10.

This sounds quite good, would be up for this

a reason to tax and mot the car, will definitely bringing her down for one last run of the year :)

What would the price on the DS1.11 pads be? i may replace the discs for some brembo ones whilst im at it Cheers Joe

too much technology aha, i started out with a medium format and a canon f1 whilst doing my gcse and just used my phones since, thought i better get with the times :wink:

My apologies for this, its the first time i've picked up a dslr, even though im quite young i was using film until about 2 years ago and havent picked a camera up since

i've gone throught all of the picture style settings and the only one that doesnt come out like it is the black and white which is to be expected https://flic.kr/p/q4MWsx

how do i stop my 500d from taking nearly every photograph with a yellow hue?

i've sent CMC over an email enquiring about the deflectors. the horn is still in as its got mot in a couple of weeks but itll be getting relocated for ease later on

i'll have to see if i can get some reflector plates from somewhere, the ds2500's were absolutely fantastic for my first couple of trackdays but since then i've picked up the pace somewhat. i was thinking about either the ds3000 or the carbon lorraine rc6 and the brembo hc discs Hi Mick, i try...

The tensioner comes off with the old alternator mount, if you unbolt the alternator at the front you can roll if forward enough to get enough slack to cut the old belt off making it much easier to take out, then following their guide it shouldn't take more than two hours :)

I have cup racer brake ducts fitted currently just missing the deflector plates, I had dot 5.1 in before but that did the same, I'll definitely be doing another flush through before I go out again

Hi there, i've recently started noticing that on track days i have to bleed my brakes mid day and at the end as well, seems like somethings making the pedal go soft quite often my current setup ate super blue ferodo ds2500 grooved discs goodridge braided lines on the front could the need to...

I think this shows how out of the loop I am, last time I checked prices on an ssd they were ludicrous

The metal plate bit of the rubbers was to narrow to fit over the rear shockers.

Hi Dan, i just check now, i'm purely now just trying to find a correctly threaded nut, i have a feeling its unf just not too sure on size.

They're on there now, I had to bore them out to fit, I'm currently stumped on what thread pattern it is, as it definitely isn't metric

Hi there, I'm currently in the process of fitting some spax coilovers and the rears seem to go straight through

In my opinion it may be better to go with some of the fusion style drives available, gives you the speed of ssd and the capacity of a disk drive

If it is the pre-retina model indeed it can, Heres the 8GB kit...

Booked on, will definately make a change from snetterton anyway

@Cudey

i've just got myself a set of the syron street race, superb value for money, 60 a tyre on 16's, havent tested them yet, but should hopefully soon