Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Re: dmallett's indecisive clio thread! Monaco ph2 pg1+, Titanium ph1 pg31+, PB ph1 pg
It looks spot on mate. OEM+ ftw. The 20mm spacers have a little tuck which looks like it should do as standard whereas the 25mm look to flush with the bumper an a bit too much. So have you got shorter wheel...
Yeah I think I may raise it up a tad. Here's a pic of the other side which has the same setting but looks higher.
Side angle by Dr-Jekyll, on Flickr
You know the drill, pics when fitted ;)
@-Danman- I believe the MAD ones are actual spacers ranging from 5mm - 15mm wide from -0.5 camber to -3.0 where as the link I mentioned are just shims that add camber but don't space it out as they are only 1mm think (approximately)
Heres a pic of MAD spacers and the shims I had on mine. Imo...
:o the front is very similar to yours. The fronts are set 115mm from bottom of upper ring to abs bracket, the rear adjusters are in and wound up 1/2 a turn from lowest setting.
The rear pictures lower than it is due to my wonky parking. Need to get some better pics on flatter ground ;)
Are you on about -2 degree shims or spacers? These are what I had in mind:
http://www.k-tecracing.com/show_product.asp?id=3630
http://www.kamracing.co.uk/renault-clio-mk2-1-rear-camber-shim-set.html
I'd be looking at camber shims as it doesn't need spacers! I believe you can get them in -0.5 and -1.0 degree off camskill and ktec's website.
I like them though. What happened to the splitter?
Thought you'd approve :)
Alex has just this moment dropped off my set of spare calipers. I've decided to just put these ones on the car and remove my existing set and my current ones are in better condition with less miles on them and will need less prep work. Once these are off the car (with...
Thanks guys :)
Im really loving it now. Everytime I look at it I think I made the right choice to get one. I will concentrate on the bodywork probably next year. This year I'd like to get/do:
Refresh calipers all round with silver hamerite, with new rebuild kit if its needed.
New discs and...
I managed to get a pic of the Cree bulbs today and a pic of the scarred boot. I fitted some new pads on the GF's micra then washed it and decided to do mine too. I also lowered the rear adjusters to the lowest setting then half a turn back up. (not sure why as the half turn has probably made no...
I went from a 182 to the same micra. Was a cheap runaround car and tbf it never went wrong at all. Had it for 2 years but wanted another clio so I got another 182. Now I have a ph1 172 and the missus has a k12 micra. Once again the micra is decent enough. It has comfort, its quiet, can take...
Glad to hear your happy with them :) coilovers or apex springs will be the next step if you want to go lower.
Yeah I know what you mean. I will be buying some c4 but I was unsure on the grill due to it having some white bits on it :S Your probably right tbh. I can't imaging they'll be much...
Alex, I thought you'd disapprove! Tbh the original HU looks ok and having the stalk control back is nice :)
Jack, they are much better than the cheap eBay jobbies :) How you getting on with the Koni's?
Haha, no present as of yet! Not much of an update tbh but...
Got the new bulbs off G172 which came promptly. Fitted the full beam ones which look great and are a match against the Cree sidelights.
New bulbs by Dr-Jekyll, on Flickr
Unfortunately the foglight ones are too wide to fit in the...
Luigi172 It has been done before quite a few times. Here's a thread from one that I've found.
http://www.cliosport.net/forum/showthread.php?519785-relocated-battery-to-the-back-for-a-new-airbox-setup!!