Search results

Lol I can sell mine for a similar price so won't cost to change ;) plus I get paid the day everyone goes :p

I'll give you what you paid for them, include side mounts too?

Selling your Recaro's then ;)

One on the top rear of the gearbox and another braided strip of metal in passenger side wheel arch that mounts to front side of box

It drains mine out like anything! Haha! iPhone's are great video not so great sound quality :( we need a go pro!

Your rails are only an inch off the floor though, they'll fit ;) Get some dimensions and check

Of course, I just meant that rather than subframe off to get gearbox out, easier to take all out the top.

It had XL in originally, I said today that it seemed shorter as the wings were a lot lower down, but an XL will fit!

Having a ramp or a pit it probably would be to take the subframe off admittedly. I'm down to getting a engine out in 2 hours on the drive though and with the above guide I'd like to think it could be done by someone with moderate experience in 3 hours. Plus with all these captive nuts rusting...

Struts are a lot easier to take off I've found, hate doing ball joints! I'll grab some pictures next time and get a proper guide up.

Lol same here but the wind woke me up!

1. DannyR 2. LewisTaylor 3. Aliengravy 4. Rhys 5. Chri5 6. Sah (Scott) 7. 8. Markerboy2002 9. dmallett 10. SHoT_CoRPSe 11. 12. 13. Jasonlt 14. lukey636 You weren't even on the list Barry :p Above is an updated list which still isn't too bad!

His Dad does, RS Murray in Leeds.

Lol, what's your reason for being up so early? I can't sleep :(

Lol, I done that too on my first one, haha!

Why don't you just run a coax cable from the RF OUT 2 from the Sky box? You'll get Sky upstairs then and with a Sky Eye be able to control the box too. HD channels will be better over the analogue than SD through the Sky too (assuming you have Sky HD). Also buy a TV with Freeview HD in, but I...

I should really do a guide for this next time, I'll try remember now though. Jack car up and remove wheels. Disconnect battery and remove. Remove front bumper, headlights, front cross member and grille. Drain gearbox and engine oil and put plugs back in. Drain coolant by undoing top and...

It'll still be wet as f**k just not raining :(

Exactly this, level of stupidity on this forum is slowly going up. People paying a premium for a KTec name on stuff when it can be made your self for less than half price! For the last ten years nobody has made any decent gains from a filter, most were said to then found out they didn't, I...

This has happened before to a few people

iOS 6? Seems very quick. I'd imagine they'll make a big thing of 5.1 as they did with 4.3 IIRC.

No it wouldnt? The further you press it in the more it moves away from the inside, going closer to the chassis, so when the bush is put in less will be seen!

Yea they will fit. Wheel arches just pop out after pulling the big clips out and the torx screws into the bumper

So far I see no facts. To me that's an ITG filter with base sprayed black. I genuinely cannot see it making a difference of what filter it is down in that part of the engine bay.

Single hose? Even if you did it with a samco/forge hose with take off and a hard pipe, which would look better, it would still be just on the £100 mark. What's so special about the filter then? And what make is it?

What filter is it then?

Yea just quickly looked on eBay and can do it for 90 quid! Lol! That's not even trade prices that K-Tec would get to then sell on, fair enough making a profit but £150 is taking the piss!

It's two 90 degree silicone hoses and what looks like an ITG filter, eBay for two silicone hoses around £20-30 then an ITG fitter for about £50

You'll have your main power cable and a two pin plug with one wire. Check the little plug isn't loose

Ya could easily get you one sorted for sub £100, it's really nothing special!