Search results

OK well check out the pictures and then see what you think. If you'd rather send it to me then so be it.

Have you not read the guide danny? Steering cowel securing is covered in the guide. If you want to send me a little bit of trim, a ph1 hazard button and a ph2 hazard button, I'd be willing to do it for you.

No pictures? LOL! They were the best bit :o No problems though, it's always nice to help. Cup controls should be fine, did you get everything clipped into place behind there? At first I had the cables loose and not in the clips so they really didn't work well. As soon as everything was...

Is it the one shaped like a snakes head with two buttons? If so, press the unlock button, then press it again to lock, but press the small button after. This disarms the interior sensors. I'd say they're stuck on or something similar.

Awesome. I love mini's, please do a proper decent and thoroughly pictured project :)

Take a picture of the fob please Dan? That red clio I PX'd with you had a cobra.

TAPED IN HAZARDS? C'mon lads, I spent a lot of time and effort on that guide, you could at least follow it ;) The B&Q plastic pipe weld held for 9 months I believe before failing when pushed over enthusiastically, remove it and re-do and it'd b'reet. Oh and FYI to you both, it's PH2 pov spec...

iirc Steve at Rsport traded this in because he couldn't stop the alarm going off.* *I may be lying.

It's not easy, it's f**king stupid. At no point whilst applying for the course did anyone mention that you had to be an apprentice, or even currently work with anything electrical. Then all of a sudden in the second year we get told that we've got a unit for the entire second year which is a...

Yes it is mark. Personally, I'd put a hole in the tape with a screw driver and put it over the popper, sticking the thing down.

I don't really know, it just doesn't look like his car does when you're standing next to it, you know? Could be the low angles? TBH, looking at it, I think it's just a weird car to photo ;)

If you'd invited me you'd have had all the tyre shine in the world.

Most motorfactors. The bits that you peel off are green, the tape itself is black.

Looking very nice indeed, but the pictures haven't really "captured" it IMO. I like the more dark look though, at first I thought they were too dark but then I realised I had the brightness all the way down :o

I'm with Mike. Claim the Lambo!

Yep. Mine looks like that.

I'll do it tonight?

8GB gives you awesome capacity to have stuff open etc, the big SSD gives you lightening fast everything else. Winner.

Seb, in simple terms.. SSD's will read and write data much faster, they're also faster from the "off" so to speak as there's no spinning up of a disc. Installing an SSD would mean that data could be written/read/everything'd a hell of a lot faster. It'll feel like a new machine TBH. I'd do the...

How many pins are on the back of the plug? If I'm right it's just a variable inline resistor, so should just be one in, one out. If it is, snip an illumination wire and put to each pin. Done.

Andy, although there's nothing on that layer, the contents of the block you imported are probably on that layer. Insert the block (onto another layer), open the block in block editor, select all, move to a different layer, save. Try to delete again.

Get a gmail account and have it import your AOL, this is what I did (5 years ago). I can give you the import details if you need them.

I have some foam tape that should solve the issue Mark if you want some and you're ever around my way.

I ran them for 15k or so on my 1.2, -60mm and it was fine. I didn't even find the ride too hard.

Why didn't you buy Wick's set you r****d? Apex aren't as bad as everyone makes out, but they do accentuate problems with shocks I've found. Eibachs are by far better quality. Don't be so tight.

You got a socket set? It looks to me like you'd get a socket in there. You need a decent club hammer though, it really does need whacking. If you were local I'd have a damn good go at it (I haven't failed to get one off yet)

Has it got a spinning sleeve then?

Yep just pulls off. Foam pads, double sided foam tape or cotton wool fix it.

Knew he's buy it. Awesome. Passenger ride for me soon!

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He Re-wrapped? AND brand new wheels? You really do have no budget with this do you? Why is it being re-done anyway?