Search results

i'd just make myself a DYI catch tank instead

I have a whole thread about the ride height and the GAZ GHA suspension (the cheaper 500 quid version) http://www.cliosport.net/forum/showthread.php?603059-What-s-your-ride-height-GAZ-GHA-owners&highlight=gaz+gha+ride+height Short story told, they won't go a real 60 mm drop unless you remain with...

sideways danny to be more specific

lol you won't die alone cause I'm ok with my gaz also To the op- I would definitely have a decent set of coilies on a supercharged clio! Just get some adjustable ones, there are many options out there. Btw the gaz I have on the softer setting only feel just a little harder than std. I'd try a...

just don't throw away the 205/45 ones cause that's the standard size! (if you didn't know that already)

+1 for the hankooks- good tyre for a good price

don't worry about the rsr split, it will wear off - that's what most experienced, I'm very pleased with the grip level they give 205/50 r 16 is too big, if the car's lowered wheel rubbing will occur

well now it's ferodo's turn to get bashed.. I'm inclined to believe that there are some bad batches out there, they still have a good reputation. mine are fine btw (no track days so far just the occasional spirited drive through the mountains)

if you like your car and want to keep for a while then get this http://www.pure-motorsport.co.uk/details.php?itemid=197&model=-1 job done!

there are obviously more ways of measuring, but I wouldn't just rely on manufacturer's claims alone, as I said GAZ for example can't give a usable 60 mm drop on the front, and going beyond 60mm is also impossible (talking from my experience) In a non sport yes, a 60mm drop is more achievable but...

have you measured beneath the subframe before and after? that doesn't look like a 60 mm drop on the front tbh. GAZ said that their coilover kit which I have could go 60 or more mm lower but in real life if I tried to go 60 mm lower the car would be standing on the bump stops on the front...

I was mostly referring to what happens to the angle of the lower arms and the driveshafts if lowered that much. things like the roll center will be all over the place but maybe this stuff is not that important if not hammering it about in the corners or doin' track days Been searching a little...

even for a non sport 60 mm is huge imo

by this photo they seem e little fragile http://www.wheelsjamaica.com/wheels_forum/index.php?topic=148795.50 Get the federals if they cost about the same

the back is 25-30 mm lower at the most, that's not 60 mm lower! That being said why would you want it 60 mm lower? it's hugely low and it will ride and handle like crap! Mine for example is about 25-30mm lower in the front (measured not assumed) and even by this small amount I get occasional...

there's a engine bay temperature test on the homepage made by a member here which shows that the coolest location for a open air filter is behind the passenger headlight like the K-tec induction setup. You may as well do a similar setup by yourself, a 70mm alloy 90 degree pipe and a cone open...

than the kit's worth every penny :D

well if I was to get myself a present I would definitely go for the linkage. It's winter so you'll never notice the mounts and the brace(unless your mounts are totally knackered), but you'll for sure see the benefits of the linkage! C'mon, every CS owner wants a more precise gearshift right?

How come your mpg's dropped down? this doesn't make any sense!

I asked you to take one because I also have some rubbing issues on the front. Unfortunatelly in my case the grinder is the only solution..