Search results

Dielectric grease doesn't conduct electricity does it? Surely you wouldn't want that on the pins.

Top mount bearings?

Every year Tony. Only £8-10 from Euro Car Parts.

Toyota used Yamaha for many head developments. Bit like Renault using Porsche for the Ph2 V6 Clio head.

I think there was a dyno day there from what i saw on one of the Clio pages on FB, but it's like June/July or something ages away. I'd just go down there and ask Chris what days he's got free rather than emailing him.

Might be worth getting it dyno'd at EFI to see what it's actually making. Can't be that low on power if it held off that E46 M3 😂

Possibly mate. Hard to tell with the pic as it could be the angle like you say. Are you doing this too as it says here? Not sure why you have to bring it past TDC to check, but must be a reason...

Is there a stretch gauge for the chain you can get for these?

Looks to have been well looked after. Got a @Tom Johnson Fulcrum cage too (y)

Not really sure tbh on the 1.2 The slow switching could also be a possible low refresh rate of the Torque app/bluetooth dongle.

The pre cat lambda switching is fine, that's what it's meant to do. I'd look at coilpack or injectors.

That's the one.

I think he expected you to know that Andy was the biggest rip off merchant the Clio world has ever seen.

@NorthloopCup will know. Does this sound about right for 197 cams mate?

That was for standard cams actually with the Group N timing, although i'm sure it'll help with your issue until you can get it mapped with a raised idle.

You have to induce a slight air leak to raise the idle to get them to run before mapping. From what i've been told anyway.

Adding a silencer won't do anything to your overall power from mapping. It'd have to be something like a 1.5" diameter exhaust to even restrict it 😂

They should have made some of these in white. Suit it so well.

You can take the piss a bit at Silverstone too with lift off oversteer, with it being f**king 500m wide 😂

Send it to @NorthloopCup if you can get the box out yourself.

When you mentioned about disabling IPv4, does that mean to run IPv6 instead or just turning it off, flushing DNS and then turning it back on again?

Cheers mate.

What will that do then? Is it something worth trying?

Asking for a mate. Brief outline is, he's got a game called Sea of Thieves on his laptop which runs Windows 10. It's an online game i believe, so it needs an internet connection to run in conjunction with the Xbox console app. The problem: It runs fine at his house on his wifi network. It...

Full setup with corner weighting, you'd be looking at near to £200

Not really 😏 I've used an old wheel bolt in the past with slots ground into it to roughen it up. Then spin the bolts with an impact gun. You could use a Dremel if you have a sanding bit too.

Aux belt is coming up to 3 years anyway, so it'll need doing.

It's the other way round too, it starts at open loop and then switches to closed loop when the lambda warms up. Then back to open loop after 5000rpm.

Within a minute or two from cold i'd imagine.

I had mine done about 3 years ago and that was one of the last ones from what i was told.